Mercedes-Benz CL65 AMG Fuel Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(60)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(60)

Fuel Pump Replacement Service

How much does a Fuel Pump Replacement cost?

On average, the cost for a Mercedes-Benz CL65 AMG Fuel Pump Replacement is $588 with $315 for parts and $273 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1024.71Shop/Dealer Price$1222.88 - $1777.88
2008 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1007.14Shop/Dealer Price$1196.69 - $1745.24
2011 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1007.14Shop/Dealer Price$1196.82 - $1745.46
2012 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1007.14Shop/Dealer Price$1196.81 - $1745.45
2013 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$957.42Shop/Dealer Price$1141.85 - $1658.58
2014 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$957.42Shop/Dealer Price$1135.35 - $1647.21
2006 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1060.41Shop/Dealer Price$1231.66 - $1714.33
2010 Mercedes-Benz CL65 AMGV12-6.0L TurboService typeFuel Pump ReplacementEstimate$1007.14Shop/Dealer Price$1196.81 - $1745.45
Show example Mercedes-Benz CL65 AMG Fuel Pump Replacement prices

What is the fuel pump and how does it work?

The fuel pump supplies pressurized gasoline to each of the fuel injectors in a car’s engine. The fuel pump is powered by a compact electric motor and is located in the vehicle’s gas tank. The pressure and output of the pump are controlled by a regulator. Filtration of the fuel occurs either in the fuel tank using a pickup screen or externally with a replaceable filter mounted in the fuel supply line.

When to consider replacing the fuel pump?

A high quality, OEM fuel pump can last indefinitely. However, as with any electro-mechanical component, a fuel pump will eventually degrade and fail. If it fails to produce adequate pressure or completely quits operating, it will need to be replaced. This failed condition can sometimes be preceded or accompanied by one or more of the following symptoms:

  • Car won’t start or unexpectedly stalls and won’t re-start. A failed fuel pump may prevent a car from starting or stall it.
  • Check engine light is on. Sometimes a fuel pump will fail slowly, and that means the fuel pressure and volume slowly degrades. The lack of fuel may result in the engine operating without enough fuel relative to the amount of air, causing the check engine light to appear.
  • Whirring noise from fuel tank. As a fuel pump fails, you may notice a whirring or humming noise coming from the fuel tank area, toward the rear of the car. If the noise is from the fuel pump, failure of the pump is often imminent and you should replace the fuel pump at your earliest convenience.

How do mechanics replace the fuel pump?

  • The fuel pump is tested to be sure it isn’t functioning.
  • Should the fuel pump be faulty, it is removed from the tank through an access panel above the tank in the passenger compartment.
  • When no access panel exists, fuel is first drained from the tank and then the fuel tank must be lowered from the vehicle to gain access to the pump.
  • In all cases, fuel pump supply and return hoses, as well as EVAP system hoses, and electrical connections to the pump must be removed.
  • Once the pump is out, any reusable brackets and pick up screens are attached to the new pump, then the new pump is installed.
  • If the fuel system uses an in-line external filter, a filter is often replaced. All hoses and electrical connections are re-established.
  • Fuel is added to the tank and the engine is run to test for leaks.

Is it safe to drive with a fuel pump problem?

Usually, it’s still safe to drive, but the pump may lead to an overheated engine and catalytic converter. Complete fuel pump failure can leave you stranded out on the road, but many times a car won’t start before initially driving.

However, if the fuel pump problem involves leaks of gasoline or vapors, it is unsafe to continue driving, and should immediately be checked by a qualified mechanic.

When replacing the fuel pump keep in mind:

  • Prior to replacing, the mechanic will power the fuel pump directly to confirm that the issue is a failed pump versus a faulty power supply to the pump.
  • Unless the fuel filter was replaced recently, whenever the fuel pump is replaced a new fuel filter should be installed.
  • When failing earlier than expected, the power supply should be verified because a voltage drop in the fuel pump circuit can lead to overheating.
  • Should the fuel tank be lowered during the repair, the fuel tank straps and fasteners should be checked for excessive corrosion and replaced as needed.
  • The fuel in the gas tank cools and lubricates the fuel pump. After installation of a new fuel pump, it’s wise to keep the gas tank at least a quarter full to maximize the life of a new fuel pump.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(60)

Rating Summary
58
2
0
0
0
58
2
0
0
0

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Mercedes-Benz CL65 AMG V12-6.0L Turbo - Power steering fluid is leaking - Scottsdale, Arizona
Waiting for work to be done...

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz CL65 AMG V12-6.0L Turbo - Idler Pulley - Tustin, California
Chris was great!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Mercedes-Benz CL65 AMG V12-6.0L Turbo - Serpentine/Drive Belt - Tustin, California
Excellent, as usual.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Mercedes-Benz 300SE L6-3.0L - Fuel Pump - Norfolk, Virginia
Excellent.

Excellent Rating

(60)

Rating Summary
58
2
0
0
0
58
2
0
0
0
Number of Mercedes-Benz Fuel Pump Replacement services completed
660+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Crankshaft Harmonic Balancer
Common signs include engine vibration, misaligned timing marks, and a separated harmonic balancer.
P2705 OBD-II Trouble Code: Transmission Friction Element F Apply Time Range/Performance
P2705 means there is a malfunction in the transmissions friction elements due to failing transmission components, low fluid level or electrical issues
How to Register a Car in Nebraska
If If you are planning a move to the great state of Nebraska, then you will need to make sure you have all of the information that you need to comply with the laws that they have there. Among the...

Clutch sticks at first engagement & also at high RPMs

Hello. The problem you are experiencing with your 2005 Honda S2000 is likely due to a leaking or sticking slave cylinder. Slave cylinders commonly develop leaks over time and suck air into the hydraulic passages. In fact, I just replace...

How to reset TPMS if no button is available

The only way to reset the light is to put the system in relearn mode. First, make sure all the tire pressures (https://www.yourmechanic.com/article/how-do-i-check-my-tire-pressure) are even set and to specifications. You may need to hook up a battery charger on low...

Does the rear wheel bearing replacement needs pressing or not? 2004 Acura RL

Hello - if you replace the wheel bearing/hub assembly (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-wheel-bearing-gone), no, it does not require pressing. This is the recommended replacement approach. Pressing the bearing off/onto the hub requires specialized equipment, with high risk for damage. I would recommend a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com