Mercedes-Benz CL600 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz CL600 Fuel Injector Replacement is $1779 with $1494 for parts and $285 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Mercedes-Benz CL600V12-5.8LService typeFuel Injector ReplacementEstimate$4554.03Shop/Dealer Price$5658.80 - $8854.98
2002 Mercedes-Benz CL600V12-5.8LService typeFuel Injector ReplacementEstimate$4494.03Shop/Dealer Price$5598.90 - $8795.14
2007 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$3510.93Shop/Dealer Price$4354.46 - $6668.14
2014 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$3510.93Shop/Dealer Price$4354.25 - $6667.76
2004 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$3339.94Shop/Dealer Price$4152.03 - $6442.12
2012 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$3510.93Shop/Dealer Price$4354.46 - $6668.14
2006 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$4750.68Shop/Dealer Price$5909.85 - $9243.37
2010 Mercedes-Benz CL600V12-5.5L TurboService typeFuel Injector ReplacementEstimate$3538.43Shop/Dealer Price$4384.24 - $6699.63
Show example Mercedes-Benz CL600 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1

Patrick

33 years of experience
1408 reviews
Patrick
33 years of experience
Mercedes-Benz CL600 V12-5.8L - Crankshaft Position Sensor - Austin, Texas
Good guy. Arrived 5 minutes early (6:55 A.M.). Got the job done quickly. Excellent knowledge and experience.

Fred

17 years of experience
389 reviews
Fred
17 years of experience
Mercedes-Benz CL600 V12-5.8L - Oil Change - Spring, Texas
Always very good as usual

Christian

12 years of experience
40 reviews
Christian
12 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Water Pump - Valley Village, California
great mecanic. very helpful.

Kenneth

20 years of experience
775 reviews
Kenneth
20 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Los Angeles, California
Very knowledgeable and deligent with his work. He is prompt and always on time.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1
Number of Mercedes-Benz CL600 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 GMC Sierra
The The 2012 GMC Sierra may not have sold quite as well as the Ford F-150, but that doesn’t mean you should dismiss this rugged and reliable model. For one thing, the Sierra is available in a half-ton version (1500)...
Symptoms of a Bad or Failing Steering Column
Common signs include steering tilt not locking, clicking or grinding sounds while turning, and the steering wheel operating roughly.
How to Replace a Variable Valve Timing (VVT) Solenoid
Variable valve timing solenoids fail when the Check Engine Light comes on, fuel economy is reduced, there is a rough idle, or loss of power.

How Does My Car Monitor Tire Pressure?

All of the cars built today come equipped with a tire pressure monitoring system (TPMS) (https://www.yourmechanic.com/article/how-does-my-car-monitor-tire-pressure). This did not become a requirement until about 2006. At that time, it was determined that a vehicle can be much safer if the...

No power any were, fully charged battery.

Hi There, You may want to double check the ground connection to the chassis of the truck. As you may know, the ground wire connects the vehicle battery to the metal chassis, completing a circuit. Without the ground wire, the...

How long can I go without getting my car serviced?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com