Mercedes-Benz CL600 Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Mercedes-Benz CL600 Spark Plug Replacement is $565 with $369 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1362.76Shop/Dealer Price$1658.02 - $2523.96
2014 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1350.15Shop/Dealer Price$1641.08 - $2503.77
2005 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1583.73Shop/Dealer Price$1879.93 - $2746.57
2003 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1583.73Shop/Dealer Price$1879.92 - $2746.56
2012 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1350.15Shop/Dealer Price$1644.75 - $2510.19
2011 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1408.54Shop/Dealer Price$1701.28 - $2565.32
2004 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1583.73Shop/Dealer Price$1880.01 - $2746.70
2008 Mercedes-Benz CL600V12-5.5L TurboService typeSpark Plug ReplacementEstimate$1408.54Shop/Dealer Price$1700.83 - $2564.54
Show example Mercedes-Benz CL600 Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(9)

Rating Summary
7
1
0
0
1
7
1
0
0
1

Jose

14 years of experience
125 reviews
Jose
14 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Spark Plugs - San Diego, California
Very kind, professional, meticulous.

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Mercedes-Benz CL600 V12-5.8L - Brake Pads Replacement (Front) - Beaverton, Oregon
Excellent service provided.

Fred

18 years of experience
389 reviews
Fred
18 years of experience
Mercedes-Benz CL600 V12-5.8L - Oil Change - Spring, Texas
Always very good as usual

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Mercedes-Benz CL600 V12-5.8L - Crankshaft Position Sensor - Austin, Texas
Good guy. Arrived 5 minutes early (6:55 A.M.). Got the job done quickly. Excellent knowledge and experience.

Excellent Rating

(9)

Rating Summary
7
1
0
0
1
7
1
0
0
1
Number of Mercedes-Benz CL600 services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Low Oil Level Sensor Last?
Having Having the right amount of oil in an engine is important to the smooth running of your engine. In order for the engine on a car to run as intended, it will have to have the right amount of...
What Does the Brake System (Hand Brake, Parking Brake) Warning Light Mean?
When the brake system warning light is on, your brakes may not work properly. The parking brake may be engaged, or there is a low fluid level.
How to Replace a Lost or Stolen Car Title in New Mexico
When When it comes to your vehicle one of the most important, if not the most important document you need to keep track of is your car title. This title is what proves you are the registered owner. This makes...

How do I use shuffle mode?

Activating shuffle mode couldn’t be easier. Simply press the SET/RND button while you’re listening to a CD, and the CD player will automatically enter shuffle mode.

Thin metal rattle noise from front

If a brake shield (aka "dust shield") is loose, or you suspect brake or wheel bearing noise, please simply request a brake noise diagnostic - rattling (https://www.yourmechanic.com/services/squealing-noise-from-brakes-inspection) and a certified mechanic will be dispatched by YourMechanic (https://www.yourmechanic.com) to evaluate your...

hey i have a 1990 ford probe GT and it has some sort of electrical issue where it start by itself. it needs to be jump started. bu

The problem sounds like the starter solenoid is sticking. You will need to check the small wire to starter to see if it is getting power all the time and if it is not powered then replace starter. If it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com