Mercedes-Benz CL55 AMG Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz CL55 AMG Brake Pad Replacement is $176 with $81 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Mercedes-Benz CL55 AMGV8-5.5LService typeBrake Pads - Rear ReplacementEstimate$292.75Shop/Dealer Price$362.19 - $514.27
2004 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Rear ReplacementEstimate$272.75Shop/Dealer Price$342.24 - $494.34
2006 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Rear ReplacementEstimate$272.75Shop/Dealer Price$342.23 - $494.34
2003 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Front ReplacementEstimate$272.75Shop/Dealer Price$342.18 - $494.24
2005 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Rear ReplacementEstimate$257.39Shop/Dealer Price$323.07 - $463.69
2003 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Rear ReplacementEstimate$272.75Shop/Dealer Price$342.23 - $494.34
2004 Mercedes-Benz CL55 AMGV8-5.5L TurboService typeBrake Pads - Front ReplacementEstimate$277.75Shop/Dealer Price$346.89 - $498.74
2002 Mercedes-Benz CL55 AMGV8-5.5LService typeBrake Pads - Front ReplacementEstimate$262.39Shop/Dealer Price$328.63 - $469.65
Show example Mercedes-Benz CL55 AMG Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Jesse

9 years of experience
12 reviews
Jesse
9 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Car will not turn over - Bradenton, Florida
Very friendly and knowledgeable, I can only recommend Jesse.

Augie

31 years of experience
263 reviews
Augie
31 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Oil/Fluid Leak - Woodland Hills, California
WOW. Exceptional mechanic and diagnosed my oil leak quickly. His decades of experience are obvious. Very pleased with the results. He will be ordering the parts needed and I've got a new, reliable, friendly and expert mechanic for my car. He will be my go to guy from now on. Love this service. Can't stop smiling. Thank you Augie. You're a good man.

Jerimiah

19 years of experience
328 reviews
Jerimiah
19 years of experience
Mercedes-Benz CL55 AMG V8-5.5L - Camshaft Position Sensor - Las Vegas, Nevada
A little bit tricky but he stuck with it and got it done

Kyle

13 years of experience
145 reviews
Kyle
13 years of experience
Mercedes-Benz CL55 AMG V8-5.5L Turbo - Oil Change - Grand Prairie, Texas
Kyle informed me when he called to reschedule. Changed my oil in under 15 mins. Will definitely seek him again for any maintenance work.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz CL55 AMG services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Connect Your iPod to a Car Stereo
You You don’t have to break the bank upgrading your vehicle’s factory stereo (https://www.yourmechanic.com/article/4-essential-things-to-know-about-your-car-s-stereo-and-speakers) just to listen to your iPod’s or MP3 player’s music. There are plenty of methods to connect your iPod to your car’s stereo system, all differing...
How to Obtain an A7 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get study guides & practice tests for an A7 Heating & Air Conditioning Repair Technician
B1972 OBD-II Trouble Code: Passenger Rear Seat Up Switch Circuit Short to Battery
B1972 means there is a circuit failure in a passenger rear seat up switch, likely due to damaged electrical components or a faulty switch.

How do I activate the immobilizer system?

The immobilizer system keeps your vehicle from being turned on with an invalid key. When the immobilizer system is activated, only a valid key can be used with the car. The system will automatically active when the ignition is turned...

My a/c intermittently blows warm and cold air.

It is possible that your blend door actuator could be failing and going back to the default position. Many vehicles will default the blend door to heat mode. When the blend door actuator fails, it will automatically revert the door...

2008 Impala radio stopped working, no door,seatbelt chimes or blinker sounds.

If there is a common power source (or even common ground) for these circuits, tracing any one of them will resolve the issue. Obviously, there is an interruption in power somewhere. If there are multiple breaks, that will be determined...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com