Mercedes-Benz CL500 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(20)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(20)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Mercedes-Benz CL500 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2004 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2000 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2001 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2003 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1998 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2006 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
2005 Mercedes-Benz CL500V8-5.0LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz CL500 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Mercedes-Benz CL500 V8-5.0L - Brake System Flush - Houston, Texas
Breck was an absolute professional. He performed the brake job quickly, thoroughly, and meticulously. Very happy with the results. Highly recommended A+

David

16 years of experience
636 reviews
David
16 years of experience
Mercedes-Benz CL500 V8-5.0L - Power steering fluid is leaking - Pittsburg, California
Very respectful,honest,and highly experienced,and professional,5 

Ralph

38 years of experience
186 reviews
Ralph
38 years of experience
Mercedes-Benz CL500 V8-5.0L - Brake Pads Replacement (Front, Rear) - Tacoma, Washington
Ralph takes his time in orde to do the job right. Very professional.

Michael

12 years of experience
65 reviews
Michael
12 years of experience
Mercedes-Benz CL500 V8-5.0L - Battery - Stockbridge, Georgia
Mr. Michael is one of the best. He showed up ahead up time, had the proper tools, was courteous, and took care of my car and recommended without pressing what needed to be addressed next.

Excellent Rating

(20)

Rating Summary
18
1
0
0
1
18
1
0
0
1
Number of Mercedes-Benz CL500 services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Does My AC Rattle When I Turn It On?
Common reasons why a car AC system makes a rattling noise is due to a failing AC compressor, worn serpentine belt, or worn out AC compressor clutch.
B1954 OBD-II Trouble Code: Seat Front Up/Down Potentiometer Feedback Circuit Failure
B1954 means there is a circuit failure related to one of the front seat's potentiometers, likely due to faulty wiring.
Top 10 Best-Selling Cars of 2016
Ford F-series pickup trucks, Toyota Camry, and Honda Civic are some of the best-selling cars of 2016 and all deliver on reliability and efficiency.

Car sputters and runs rough upon acceleration. 1995 BMW 318i

Hello. Thanks for writing in about your 1995 BMW 318i. This problem is usually caused by worn out spark plugs and spark plug wires. When the spark plugs are worn out (https://www.yourmechanic.com/services/spark-plugs-replacement) they don’t fire as well during acceleration. If...

Car won't pass inspection due to various issues with shocks, strut, coil springs. Is it better to get both sides done or only one?

Hi there: Anytime front end components are faulty, they should ALWAYS be replaced in pairs. Example; if you've got a bad driver side strut, the passenger side needs to be replaced as well. The reason for this is safety; and...

Electrical wiring issue with the dash lights.

Check the lights on the dash and look for the wiring. Follow the wires to where they hook up to and check that component to see if it's working. Most dash lights are hooked into the light switch and on...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com