Mercedes-Benz C43 AMG Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C43 AMG Power Steering Pressure Hose Replacement is $337 with $223 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mercedes-Benz C43 AMGV8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$584.55Shop/Dealer Price$726.19 - $1083.62
1999 Mercedes-Benz C43 AMGV8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$560.55Shop/Dealer Price$702.25 - $1059.71
1998 Mercedes-Benz C43 AMGV8-4.3LService typePower Steering Pressure Hose ReplacementEstimate$560.55Shop/Dealer Price$702.24 - $1059.70
Show example Mercedes-Benz C43 AMG Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Jeremy

20 years of experience
592 reviews
Jeremy
20 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Oil/Fluid Leak - Delray Beach, Florida
Very honest, knowledegable and friendly guy. He's a car buff too and will talk about his cars!

Jerry

30 years of experience
48 reviews
Jerry
30 years of experience
Mercedes-Benz C43 AMG V8-4.3L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Las Vegas, Nevada
Jerry did a great job. definitely knows MB. very clean operation.

Antonios

18 years of experience
56 reviews
Antonios
18 years of experience
Mercedes-Benz C43 AMG V6-3.0L Turbo - Brake Pads Replacement (Front, Rear) - Needham, Massachusetts
Excellent. On time, honest, explained every step. Great to work with.

Adam

17 years of experience
230 reviews
Adam
17 years of experience
Mercedes-Benz C43 AMG V6-3.0L Turbo - Pre-purchase Car Inspection - West Palm Beach, Florida
Fantastic. Very thorough and responded quickly to questions. Highly recommend!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz C43 AMG services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Adjust to Driving a Car on the Left Side of the Road
Knowing how to use a right-hand drive vehicle is crucial if you travel or move overseas, as you may be required to drive on the left side of the road.
Understanding the Ram Oil Change Indicator and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Ram Oil Change Indicator tells you when and what service your car needs.
How to Buy a Personalized License Plate in Wyoming
Most Most people love easy and affordable ways to make their car a little bit more fun, which is why personalized license plates have become so easy. Ordering a personalized plate is a quick and affordable way to add some...

Front end rattling noise in 2005 Mitsubishi Lancer ES

When you get rattling, there are so many possible causes for the rattle. Watch my older video “finding the source of car noises (https://www.youtube.com/watch?v=pqh1oH8mEqY).” I’ve got this cool device that you can get on eBay, used for 50- 80 bucks....

Ignition coil overheating

When electrical components get hot it is typically due to a high level of resistance. The most common issues with the coils getting hot are caused by the spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), or the distributor (https://www.yourmechanic.com/services/distributor-rotor-and-cap-replacement). You may want...

I feel a vibration when I apply my brakes.

If the vibration you are feeling only comes when you apply the brakes, the problem may be in the braking system. Typically, a vibration felt in the steering wheel while braking is tied to the front brakes and this vibration...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com