Mercedes-Benz C350e Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz C350e Brake Master Cylinder Replacement is $397 with $273 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeBrake Master Cylinder ReplacementEstimate$707.89Shop/Dealer Price$858.61 - $1279.29
2018 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeBrake Master Cylinder ReplacementEstimate$670.39Shop/Dealer Price$820.14 - $1240.08
2017 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeBrake Master Cylinder ReplacementEstimate$679.89Shop/Dealer Price$830.64 - $1251.33
Show example Mercedes-Benz C350e Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Miguel

21 years of experience
232 reviews
Miguel
21 years of experience
Mercedes-Benz C350e L4-2.0L Turbo Hybrid - Oil Change - Edgewater, New Jersey
Very professional! He answered all questions! He was also very polite

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Brake Master Cylinder - Chicago, Illinois
Rigo is a maverick hands down. Don’t take your car for work elsewhere. Especially great at Mercedes—this guy knows his profession! I will be using him for everything related to my car going forward.

Rocco

22 years of experience
302 reviews
Rocco
22 years of experience
Mercedes-Benz 300SD L5-3.0L Turbo Diesel - Brake Master Cylinder - Newport Beach, California
Rocco was fantastic!

Frank

15 years of experience
31 reviews
Frank
15 years of experience
Mercedes-Benz 450SL V8-4.5L - Brake Master Cylinder - Downers Grove, Illinois
he was on time ,polite ,professional.did the work quickly .work was done correctly..my car is difficult to work on.small car with no room to maneuver but he was able to get inside and get it done.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Mercedes-Benz Brake Master Cylinder Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Do All Vehicles Have an OBD System?
Today’s Today’s cars are equipped with sophisticated technology. The OBD system (on-board diagnostics) is actually advanced enough to monitor several critical systems on your vehicle and warn you when something starts to go wrong, which can prevent serious damage in...
The Best Used Cars to Buy If You’re a Plumber
Plumbers Plumbers need to carry around all manner of tools and supplies. If you’re plumbing a large building, or even a decent sized home, you’re going to need a vehicle that has quite a bit of cargo capacity. A car...
Symptoms of a Bad or Failing Ignition Coil
Common signs include the Check Engine Light coming on, engine misfiring, rough idle, a reduction in power, and the car not starting.

Car has electrical problems and starting issues

My guess is that the problem is with the body control module (BCM). The BCM functions as the power mode master (PMM). In this role, it receives an input from the ignition switch when the key is turned to the...

my car stopped working on the highway

Sudden shutdown of the engine can be due to the timing belt breaking, fuel pump failure, ignition switch failure, cam and/or crankshaft position sensor failure and like "global" failures. There may be downloadable diagnostic trouble codes from your car's OBD-II...

My car is making knocking noise while I slow down and stopped

The engine will need to have the noise checked to see if the work done was done correct and nothing was left loose or not working correctly. The noise described if is not coming from the engine may be in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com