Mercedes-Benz C320 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(53)

Fuel Injector Replacement Estimate for Mercedes-Benz C320

Mercedes-Benz C320 Fuel Injector Replacement costs $948 on average.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz C320V6-3.2LService typeFuel Injector ReplacementEstimate$1669.23Shop/Dealer Price$2091.76 - $3215.98
2001 Mercedes-Benz C320V6-3.2LService typeFuel Injector ReplacementEstimate$1643.23Shop/Dealer Price$2058.56 - $3177.38
2004 Mercedes-Benz C320V6-3.2LService typeFuel Injector ReplacementEstimate$1643.23Shop/Dealer Price$2058.55 - $3177.37
2005 Mercedes-Benz C320V6-3.2LService typeFuel Injector ReplacementEstimate$1637.37Shop/Dealer Price$2051.12 - $3165.47
2003 Mercedes-Benz C320V6-3.2LService typeFuel Injector ReplacementEstimate$1643.23Shop/Dealer Price$2058.62 - $3177.50
Show example Mercedes-Benz C320 Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(53)

Rating Summary
50
0
2
0
1
50
0
2
0
1

Chris

22 years of experience
2092 reviews
Chris
22 years of experience
Mercedes-Benz C320 V6-3.2L - Pre-purchase Car Inspection - Laguna Niguel, California
Perfect expert inspection. Couldn't have asked for more. Chris did not let the dealer sweet talk or try to swindle his way out of mechanical issues. Loved it. Would recommend Chris 100%

Trevor

18 years of experience
9 reviews
Trevor
18 years of experience
Mercedes-Benz C320 V6-3.2L - Fuel Pump - Oakland, California
Excellent work I was very happy with the service that was provided

Michael

22 years of experience
67 reviews
Michael
22 years of experience
Mercedes-Benz C320 V6-3.2L - Car is not starting - Las Vegas, Nevada
he was very knolagable and found the problem wright away

Nicholas

11 years of experience
303 reviews
Nicholas
11 years of experience
Mercedes-Benz C320 V6-3.2L - Car Battery Replacement - Houston, Texas
VERY THOROUGH AND PROFESSIONAL!

Excellent Rating

(53)

Rating Summary
50
0
2
0
1
50
0
2
0
1
Number of Mercedes-Benz C320 services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

P0331 OBD-II Trouble Code: Knock Sensor 2 Circuit Range/Performance (Bank 2)
Trouble code P0331 means the powertrain control module (PCM) senses a faulty knock or ping noise coming from the car engine.
The Best and Worst States to Drive in
America's best states to drive in have cheap gas and smooth, safe roads. Minnesota and Utah are ranked as the greatest states to drive.
Wintertime Road Trip Checklist
Keep safe and warm on road trips in cold weather by keeping car fluids topped up, the fuel tank full, and watching out for black ice.

Fuel pump

Fuel line quick connectors are typically used on late model GM products. These connectors have an internal o-ring and plastic clips that must be secure (verified) to be sure everything stays together. If you need connectors fabricated or supplied to...

My car needs a throttle body cleaning, but I'm worried about the idle and relearning process

Hi there. This is a very good question that I wish more people would ask. Your 2006 Pathfinder's engine control unit (ECU) does evolve and learn as it goes. Anytime you clean the throttle body or complete major "routine" service,...

Gas cap notification and check engine light came on after getting gas. Car started to sputter and stall out.

Hi there. When the fuel cap is not securely fastened to the tank, it can create vacuum issues inside the tank; which triggers the error code to be stored in the ECU. The error will then trigger the check engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com