Mercedes-Benz C300 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(601)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(601)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz C300 Brake Master Cylinder Replacement is $463 with $281 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Mercedes-Benz C300L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$778.90Shop/Dealer Price$928.20 - $1356.24
2017 Mercedes-Benz C300L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$790.21Shop/Dealer Price$939.23 - $1380.52
2015 Mercedes-Benz C300L4-2.0L TurboService typeBrake Master Cylinder ReplacementEstimate$766.29Shop/Dealer Price$911.32 - $1336.16
2008 Mercedes-Benz C300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$799.33Shop/Dealer Price$952.61 - $1402.23
2009 Mercedes-Benz C300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$799.33Shop/Dealer Price$956.22 - $1408.55
2013 Mercedes-Benz C300V6-3.5LService typeBrake Master Cylinder ReplacementEstimate$799.33Shop/Dealer Price$952.96 - $1402.83
2012 Mercedes-Benz C300V6-3.0LService typeBrake Master Cylinder ReplacementEstimate$799.33Shop/Dealer Price$952.65 - $1402.30
2014 Mercedes-Benz C300V6-3.5LService typeBrake Master Cylinder ReplacementEstimate$799.33Shop/Dealer Price$952.61 - $1402.23
Show example Mercedes-Benz C300 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(601)

Rating Summary
569
18
6
1
7
569
18
6
1
7

Tony

36 years of experience
79 reviews
Tony
36 years of experience
Mercedes-Benz C300 V6-3.0L - Car is making a noise - Atlanta, Georgia
Very knowledgeable, should have had him in the beginning.

Kevin

25 years of experience
651 reviews
Kevin
25 years of experience
Mercedes-Benz C300 V6-3.0L - Car is not starting - Atlanta, Georgia
Very knowledgeable and courteous

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Mercedes-Benz C300 V6-3.0L - Stabilizer Bar Links Replacement (Front) - Houston, Texas
Great work......finished in record time.

Kelly

35 years of experience
173 reviews
Kelly
35 years of experience
Mercedes-Benz C300 V6-3.0L - Spark Plugs - Charlotte, North Carolina
Came early, and finished early. Great job.

Excellent Rating

(601)

Rating Summary
569
18
6
1
7
569
18
6
1
7
Number of Mercedes-Benz C300 services completed
6611+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan Cube
The The unique appearance of the 2012 Nissan Cube draws attention everywhere it goes. However, drivers appreciate the numerous standard features like speed-sensitive steering, keyless entry, cruise control and 16-inch alloy wheels to name a few. The result is a...
Veteran and Military Driver Laws and Benefits in Massachusetts
The The state of Massachusetts offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration and driver license fee...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Delaware
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Delaware, which are all completed by the state's DMV.

Engine knock and hesitation

The poor acceleration and misfiring can definitely be tied to the[clogged catalytic converter, but something had to clog the converter. In many cases, oil entering the exhaust or too rich of an air/fuel mixture can overwork the catalytic converter to...

Heard loud noise, engine light turned on, the a/c stopped working and the car was very hard to drive. I saw a broken hose. Help!

Overheating (https://www.yourmechanic.com/services/car-is-overheating-inspection) can be caused by a number of issues. The hose blown off could be the cause as well as an effect. The engine could have begun to overheat before the hose blew off due to things like a...

My car jerks when I accelerate, what can be the cause of this issue?

You may have an ignition system misfire due to worn spark plugs or shorting plug wires or coils. I recommend having the codes stored in computer tested to see if it points to the cause of the problem. The problem...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com