Mercedes-Benz C220 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz C220 Control Arm Assembly Replacement is $294 with $112 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$501.26Shop/Dealer Price$577.90 - $786.56
1994 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$442.95Shop/Dealer Price$503.75 - $675.33
1995 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$457.54Shop/Dealer Price$518.74 - $690.61
1995 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$805.91Shop/Dealer Price$957.51 - $1401.36
1996 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$868.95Shop/Dealer Price$1040.18 - $1534.21
1995 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$501.34Shop/Dealer Price$563.98 - $736.93
1994 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$442.95Shop/Dealer Price$503.85 - $675.51
1995 Mercedes-Benz C220L4-2.2LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$487.75Shop/Dealer Price$559.81 - $765.04
Show example Mercedes-Benz C220 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Jose

18 years of experience
154 reviews
Jose
18 years of experience
Mercedes-Benz C220 L4-2.2L - Oil Change - Las Vegas, Nevada
Jose showed up right on time. He was very knowledgeable and completed the job very quickly. He also suggested some other things that I might need but was not pushy. Thank you so much!

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Mercedes-Benz C220 L4-2.2L - car is locked...key wont turn and steering wheel will not unlock. - Concord, California

Chris

17 years of experience
340 reviews
Chris
17 years of experience
Mercedes-Benz C220 L4-2.2L - 75 Point Safety Inspection - La Mesa, California
Fantastic! Chris was great. He saved me money. Do not wait. Have Chris come out today and fix your problem.. Thank you Chris.

Joseph

18 years of experience
107 reviews
Joseph
18 years of experience
Mercedes-Benz C220 L4-2.2L - Clunking or knocking noise from wheels - Johns Island, South Carolina
Very knowledgeable with my European car, started engine and diagnosed problem immediately. Joseph even explained and showed my husband exactly what was causing the noise, and what can be done to solve it. He did not oversell and instead said that noise can be resolved quite easily with the right part and rest of the engine was in very good condition. A 50 point safety check was even performed. Would definitely use this service, and Joseph!

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mercedes-Benz C220 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P003A OBD-II Trouble Code: Turbocharger/Supercharger Boost Control "A" Position Exceeded Learning Limit
The P003A trouble code means the Electronic Computer Module (ECM) has detected an issue in the turbocharger or supercharger system.
What are the Car Pool Rules in Florida?
Car Car pool lanes have become increasingly popular in the United States, and Florida is no exception to the new normal. While Florida doesn’t have as many miles of car pool lanes as many other states, they still have a...
How to Transfer a Car Title in Idaho
In In order to prove ownership of a car, you must have the title. However, when a car is sold, given away or inherited, the title needs to be transferred into the new owner’s name. The state of Idaho has...

Will a sticking valve burn out my variable valve timing solenoid?

Hi there. Typically a sticking valve does not cause the VVT solenoid (https://www.yourmechanic.com/article/how-long-does-a-variable-valve-timing-vvt-solenoid-last) to fail, but it can increase vacuum pressure inside the motor that will lead to other timing related issues, which can trigger the same error codes. Anytime...

Is the solenoid and starter one unit or separate.

Most if not all starters on the market will include the starter solenoid with the replacement starter for this car. You may be able to purchase the parts separate but it is not common practice since it adds labor to...

My car will not move while I put it in Gear

Hi Francisco. If you can feel the vehicle shift into gear after moving the shifter into a forward gear, then it's likely that there is internal damage inside the transmission. However, if you move the shifter but nothing appears to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com