Mercedes-Benz C220 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Mercedes-Benz C220 Throttle Body Replacement is $1559 with $1377 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Mercedes-Benz C220L4-2.2LService typeThrottle Body ReplacementEstimate$2956.34Shop/Dealer Price$3653.24 - $5725.51
1995 Mercedes-Benz C220L4-2.2LService typeThrottle Body ReplacementEstimate$2944.63Shop/Dealer Price$3637.51 - $5706.77
1994 Mercedes-Benz C220L4-2.2LService typeThrottle Body ReplacementEstimate$2944.63Shop/Dealer Price$3637.57 - $5706.87
Show example Mercedes-Benz C220 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0

Michael

11 years of experience
23 reviews
Michael
11 years of experience
Mercedes-Benz C220 L4-2.2L - Loud squealing or rattling is coming from engine - Atlanta, Georgia
He was great, very smooth and easy process.

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Mercedes-Benz C220 L4-2.2L - car is locked...key wont turn and steering wheel will not unlock. - Concord, California

Joseph

18 years of experience
107 reviews
Joseph
18 years of experience
Mercedes-Benz C220 L4-2.2L - Clunking or knocking noise from wheels - Johns Island, South Carolina
Very knowledgeable with my European car, started engine and diagnosed problem immediately. Joseph even explained and showed my husband exactly what was causing the noise, and what can be done to solve it. He did not oversell and instead said that noise can be resolved quite easily with the right part and rest of the engine was in very good condition. A 50 point safety check was even performed. Would definitely use this service, and Joseph!

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Mercedes-Benz C220 L4-2.2L - Other Inspections - Concord, California
Stephan provided a professional job both in technical know how but also in customer relations. He is a good representative for the Your Mechanic organization. Would love to have him work with us again.

Excellent Rating

(11)

Rating Summary
10
1
0
0
0
10
1
0
0
0
Number of Mercedes-Benz C220 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Finance a Used Car
You’ve You’ve saved some money to purchase a used car. And while you could use those funds to pay cash for a vehicle from an individual, you can also benefit from having money in hand when visiting a dealership. The...
How Rims Work and Why They Matter
Buying new car rims can change how your car drives. Correct wheel fitment will help ensure that your car wheels will be compatible with your vehicle.
Insurance Requirements for Car Registration in West Virginia
All All drivers in the state of West Virginia are required to carry minimum amounts of liability insurance, or “financial responsibility,” in order to legally operate a vehicle on the West Virginia roadways. The minimum financial responsibility requirements for West...

How do I use shuffle mode when playing music off of a USB drive?

Shuffling songs is the same on your USB drive as it is when you use an iPod with a USB cable: Rotate the Menu or Menu/Sel knob until it highlights Shuffle Songs, then press the knob. Use the Menu or...

Transmission slipping while driving

The transmission in your Pontiac uses solenoids to control the shifting from one gear to the next. Typically there is a solenoid for 1st and 2nd gear, a second solenoid for 3rd and 4th gear and a 3rd and 4th...

brakes

Brake noise is not normal and is due to the failure to use OEM (dealer supplied) brake pads, apply shims to the pads as required in the OEM set-up, use appropriate anti-squeal compounds, and also failure to properly re-surface the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com