Mercedes-Benz B250 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,532)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5,532)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Mercedes-Benz B250 Front Crankshaft Seal Replacement is $159 with $17 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$206.39Shop/Dealer Price$241.11 - $286.23
2015 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$176.39Shop/Dealer Price$211.16 - $256.31
2016 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$176.39Shop/Dealer Price$211.16 - $256.30
2018 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$176.39Shop/Dealer Price$199.85 - $236.52
2013 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$176.39Shop/Dealer Price$211.20 - $256.38
2017 Mercedes-Benz B250L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$176.39Shop/Dealer Price$199.89 - $236.58
Show example Mercedes-Benz B250 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,532)

Rating Summary
5,147
187
54
28
116
5,147
187
54
28
116

Michael

29 years of experience
23 reviews
Michael
29 years of experience
Mercedes-Benz C230 L4-2.3L - Front Crankshaft Seal - Silver Spring, Maryland
Michael was on time (showed up early, actually) and he worked pretty fast and explained and showed me everything he'd done.

Ben

25 years of experience
22 reviews
Ben
25 years of experience
Mercedes-Benz C230 V6-2.5L - Front Crankshaft Seal Replacement - Norman, Oklahoma
Ben was great. Showed up on time, brought all the tools he needed for a fairly involved job, even custom made a tool, and thoroughly cleaned up the area when finished. He was very knowledgeable about the job at hand, completed it efficiently, and did not try to up-sell any additional service. The price paid was exactly as quoted even though it was a more involved fix than estimated. Very impressed with Ben and the service.

Henry

34 years of experience
170 reviews
Henry
34 years of experience
Mercedes-Benz GL450 V8-4.6L Turbo - Brake Pads Replacement (Front) - Sicklerville, New Jersey
Great

Damian

11 years of experience
430 reviews
Damian
11 years of experience
Mercedes-Benz C300 V6-3.0L - Brake Rotor/Disc Replacement (Front) - Apopka, Florida
Great Job

Excellent Rating

(5,532)

Rating Summary
5,147
187
54
28
116
5,147
187
54
28
116
Number of Mercedes-Benz services completed
60852+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing AC Control Module
Common signs include inconsistent cooling, out-of-date software, and uneven air distribution, since the module controls the whole AC system.
How to Choose What Type of Car You Would Like to Build
Car Car shows are packed with vehicles that have been customized to one degree or another. Many custom cars have everything from custom paint jobs to engine modifications, from oversized wheels (https://www.yourmechanic.com/article/all-about-oversized-wheels-and-tires) to personalized interior work, even sound system or...
Windshield Laws in Ohio
If If you drive a vehicle on the roadways in Ohio, you already know about the numerous traffic laws you are required to follow for safety. In addition to those rules, Ohio also has regulations in place to ensure your...

No current to fuel pump

First, I would check the inertia switch. This switch opens on perceived impact and prevents power from getting to the fuel pump. There should be continuity across the switch at all times. If the switch is good, I would check...

My car feels like jumpy or chirpy. I had oil change a week before.

Hi there. Check the serpentine / drive belt on the engine. The chirping noise that you are hearing is the belt being loaded up or slipping. If the belt is old, then I recommend replacing the belt with a new...

Ignition was destroyed by crook can I start this motor?

If your car has a factory installed anti-theft system, starting the car is much more difficult. The anit-theft system uses the ignition key, ignition lock cylinder and switch to determine if the car will be allowed to start. There are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com