Mercedes-Benz AMG GT R Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT R Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz AMG GT RV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2020 Mercedes-Benz AMG GT RV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz AMG GT RV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
* Mercedes-Benz AMG GT RV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mercedes-Benz AMG GT R Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Tinashe

13 years of experience
644 reviews
Tinashe
13 years of experience
Mercedes-Benz E500 V8-5.0L - Power Steering Belt - Canton, Georgia
Great mechanic was very knowledgeable about what needed to be done. He was on time I will definitely book him again.

Eric

14 years of experience
73 reviews
Eric
14 years of experience
Mercedes-Benz C300 L4-2.0L Turbo - Auxiliary Battery Replacement - Hampton, Georgia
great job

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Mercedes-Benz S550 V8-5.5L - Strut Assembly Replacement (Front) - Laguna Niguel, California
Went out of his way to complete the job and satisfy me as the customer.

Jay

37 years of experience
968 reviews
Jay
37 years of experience
Mercedes-Benz C300 V6-3.0L - Car is not starting - San Bernardino, California
I was grateful to see Jay because he has a lot experience and if I would need more work on my car, he would have done a great job.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Check If Your Tires Are in Good Condition
Tires Tires are the foundation on which your car or truck rests. Checking if your tires have good tread and suitable pressure will improve your car's handling, gas mileage, and general tire life. Here's how: Assess how much tread is...
Symptoms of Bad or Failing Differential / Gear Oil
If your car has exceeded its gear oil service interval, or if you hear the differential whining, you may need to replace the differential/gear oil.
The Top 5 Selling Cars in Kansas in 2012
Kansas Kansas sees a varied climate with all four seasons, which means drivers in the area choose a variety of vehicles. In years past, some of the front-runners have included the Ford F-150, Buick and Toyota Camry. 2012’s top five...

Spark knock

If you are getting spark knock then you may have a bad mass airflow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) telling the computer you are at or above 10,000 feet above sea level and would run the engine lean. Have the sensor tested. As...

power steering fluid

A power steering fluid service (https://www.yourmechanic.com/services/power-steering-fluid-service) should be done every 3-4 years. It was once an overlooked service but like any other fluid service (engine oil, transmission fluid, etc), the more frequently you change it, the more life you will...

pads are 2mm on 2014 yukon xl denali with 52000 miles...all works good...incidental finding...do I replace now? Pads and rotors? o

At 2mm, the pads are definitely due for replacement. The the thickness of the brake rotors should be measured and compared to the minimum thickness specifications. If they measure above the specs and there is enough thickness to them, resurfacing...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com