Mercedes-Benz AMG GT Black Series Engine oil is black and gritty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Engine oil is black and gritty Inspection Service

How much does a Engine oil is black and gritty Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT Black Series Engine oil is black and gritty Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeEngine oil is black and gritty InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
2021 Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
* Mercedes-Benz AMG GT Black SeriesV8-4.0L TurboService typeEngine oil is black and gritty InspectionEstimate$104.99Shop/Dealer Price$119.68 - $130.70
Show example Mercedes-Benz AMG GT Black Series Engine oil is black and gritty Inspection prices

Car engines need oil to operate smoothly and efficiently. Engine oil helps lubricate the dozens of moving and interacting parts, helps prevent rust and corrosion as well as aiding in removing the heat that an engine generates. Modern oil also helps keep an engine clean by removing sludge and build-up. An engine without oil simply will not function.

Brand new engine oil is a lovely amber color but over time it will turn black and in some cases will get gritty. Fortunately, this is usually not a problem, it is simply a result of the oil doing the job it was designed to do.

How this system works:

The primary function of engine oil is to lubricate the various moving parts of an engine. The constant contact between these moving parts generates both heat and wear and tear. Engine oil keeps friction to a minimum and dissipates the heat.

Engine oil is stored in the oil pan. The pan holds between 4 and 6 quarts of oil. When an engine is started, an oil pump sucks the oil from the pan through the pickup tube. The oil then travels to the oil filter, which removes any dirt and debris that has accumulated in it and then sends the oil into the engine via spurt holes. The oil moves through the engine and eventually makes it way back to the oil pan where the process starts again.

Common reasons for this to happen:

  • Normal Wear and Tear: Regardless of how often oil is changed, eventually it becomes black and slightly gritty. This simply means it is doing its job. Modern detergent engine oils which have detergent additives are designed to disperse the tiny particles or engine sludge and hold them in suspension in the oil so they do not build up on engine parts.

This will make the oil darker in color, and slightly gritty but it’s better for the build up to be trapped in the oil then building up on the vehicles engine parts. Oil can only hold so much sludge and eventually it will need to be replaced.

  • Dirty Oil Filter: An oil filter’s primary function is to filter out contaminants in the oil that it picks up while cycling through the engine. Over time an oil filter will become full and will need to be replaced. If it is unable to filter the oil the contaminants will remain in the oil and possibly damage the engine.

  • Overdue for an Oil Change: Oil needs to be changed on a regular basis. While oil turning black and getting slightly gritty is normal, extremely black oil that develops globs on the dipstick needs to be changed immediately. The interval between oil changes will vary depending on the type of oil being used but it is a good idea to follow the manufacturers recommendations.

While 3,000 miles used to be the recommendation, most modern oils, especially synthetics can go between 7,000-10,000 before an oil change is needed.

  • Oil Light Comes On: In most vehicles, if the Oil Warning light comes on, it is reason for immediate concern. In most cases this will indicate a low oil pressure situation, which could be the result of a failing oil pump or a leak. This can do severe damage to the engine. The vehicle should be inspected and repaired immediately.

  • Oil Level is Dropping: If the vehicle is consistently low on oil or the level is dropping sharply over a short period of time, there is probably an oil leak somewhere in the system. An oil leak can lead to a dangerously low amount of oil in the car and should be repaired immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Oil is Black and Gritty issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic look for normal wear and tear of the engine oil, along with the oil filter, oil level and other indications that will help determine if any problem exists or if additional procedures are required in order to provide you with an accurate diagnosis.

How important is this service?

In most cases black and gritty engine oil is normal. Engine oil should be changed on a regular basis according to the manufacturers recommendations. Going too long between oil changes can affect the performance of the engine and lead to expensive repairs.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Chris

18 years of experience
502 reviews
Chris
18 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Door Mirror Replacement (Passenger Side) - Sugar Land, Texas
Excellent service

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz CLK350 V6-3.5L - Oil Change - Spring, Texas
Went beyond to explain points of engineering for my car that I found helpful.

Jose

37 years of experience
21 reviews
Jose
37 years of experience
Mercedes-Benz E350 V6-3.5L - Fuel Pump - Clermont, Florida
Jose was a little early and that was greatly appreciated. Jose is very good and courteous he explained to me in great details and I will always request him wherever I have to do any work on my car.

Chad

16 years of experience
76 reviews
Chad
16 years of experience
Mercedes-Benz S600 V12-6.0L - Car is not starting - Richmond, Virginia
CHAD, THANKS FOR WHAT YOU DONE,I AM GOING TO GET IT INSPECTED AND HAVE MY CHARGING SYSTEM CHECK OUT.I AM GOING TO RESTORE MY BIGBODY CAN YOU HELP!!!

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

What Sensors Do All Cars Have? And What Optional Ones Are There?
Modern cars have an increasing amount of sensors. Most cars have an oxygen sensor and a throttle position sensor, but parking sensors are optional.
P0418 OBD-II Trouble Code: Secondary Air Injection System Relay A circuit Malfunction
P0418 indicates that a problem has occurred in the secondary air injection system which causes engine hesitation when accelerating and stalling.
P0793 OBD-II Trouble Code: Intermediate Shaft Speed Sensor Circuit No signal
P0793 code means the transmission fails to provide a proper shift strategy due to faulty sensors, shift solenoids, or faulty wiring.

Delay in response time?

If I understand you correctly you push the gas pedal and the RPM's go up but you do not move and then it catches and you take off. If this is what you mean then you have a problem with...

No srart no crank

If you jump the starter solenoid on the fender from the small terminal to the cable to the battery then the starter should turn. If it turns then you may have a starter interrupt switch that is bad on the...

I have p0128, p0304, and p0420 engine will not run.

I believe it was the P0128 code that did it. This code indicates a faulty thermostat or a faulty coolant temperature sensor. If the P0420 code has been around for a while, this would not only not have caused the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com