Mercedes-Benz 600SL Parking brake won't engage Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,670)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,670)

Parking brake won't engage Inspection Service

How much does a Parking brake won't engage Inspection cost?

On average, the cost for a Mercedes-Benz 600SL Parking brake won't engage Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SLV12-6.0LService typeParking brake won't engage InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SL Parking brake won't engage Inspection prices

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119

Mike

16 years of experience
17 reviews
Mike
16 years of experience
Mercedes-Benz 600SL V12-6.0L - Pre-purchase Car Inspection - Las Vegas, Nevada
Mike was on point and provided honest feedback on a pre purchase car inspection. Thank you Mike!

James

8 years of experience
128 reviews
James
8 years of experience
Mercedes-Benz C300 V6-3.0L - Electric Problems Inspection - Atlanta, Georgia
Very knowledgeable and found the source of the problem pretty quick. I would definitely recommend his services.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz ML320 V6-3.2L - Window Motor Replacement (Driver Side Front) - Bethesda, Maryland
Very professional

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Mercedes-Benz 240D L4-2.4L Diesel - Clutch Slave Cylinder - Belmont, North Carolina
Brikk, was an excellent mechanic, very nice, polite & efficient. He was willing to go the extra mile to please me!

Excellent Rating

(5,670)

Rating Summary
5,278
191
54
28
119
5,278
191
54
28
119
Number of Mercedes-Benz services completed
62370+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0158 OBD-II Trouble Code: 02 Sensor Circuit High Voltage (Bank 2, Sensor 2)
P0158 P0158 trouble code definition Oxygen Sensor Circuit High Voltage (Bank 2 Sensor 2) What the P0158 code means The P0158 trouble code appears when the sensor has remained at a high voltage for too long. This oxygen sensor is...
Rules of the Road For Oklahoma Drivers
Do Do you know the rules of the road in Oklahoma? While a lot of traffic laws are consistent from state to state, there are some important differences. If you live in Oklahoma or you’re planning a trip there soon,...
The Traveler’s Guide to Driving in India
India India has a rich history and a fascinating culture, and it is no wonder why so many people want to visit. There are many different things that you can enjoy when you visit (http://jalopnik.com/a-guide-to-driving-in-india-without-dying-262254628) India. Some might want to...

How do I use the sun visor vanity mirror?

The sun visors in your car have a mirror built into them. Some mirrors are illuminated with a lamp in the visor or one above the visor. To use the mirror, open the cover by sliding it to a side...

Battery not staying charged

Hello. The battery is basically a storage device that requires constant charging from the alternator. I would have your alternator tested. If the alternator is not the problem, I would check for a parasitic draw. This happens when something in...

is it normal for an engine light that's been reset after service to come back on?

Any given diagnostic trouble code will typically have multiple faults listed as potential causes of "the" code setting. It is possible for one fault (in your case an oxygen sensor that might not be putting out the expected waveform) to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com