Mercedes-Benz 600SL Car is hesitating and bucking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Car is hesitating and bucking Inspection Service

How much does a Car is hesitating and bucking Inspection cost?

On average, the cost for a Mercedes-Benz 600SL Car is hesitating and bucking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 600SLV12-6.0LService typeCar is hesitating and bucking InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz 600SL Car is hesitating and bucking Inspection prices

When you press the gas pedal, you expect the engine to rev and the car to accelerate. If your fuel delivery system, ignition components and exhaust system are all working properly, that’s what happens. However, even just one problem in any of the systems mentioned could lead to your car hesitating and bucking under acceleration, during deceleration, or at idle.

How this system works:

When you press the gas pedal, the fuel pump sends gasoline through the fuel filter, up the fuel line, and to the injectors. The injectors “atomize” the gas, and spray it into the injectors (atomization just means it turns it into a very fine mist). There, the spark plugs ignite the gasoline, which combusts, moving the pistons and turning the engine.

Gasoline combustion creates fumes (exhaust), which must be vented. This is done through a relatively complex network of components. Most of the exhaust is sent through the exhaust manifold, the catalytic converter, and then out the exhaust pipe. Along the way, some of it is recirculated and burned again (using the EGR valve), and oxygen sensors monitor the exhaust process for the right levels of contaminants.

Common reasons for this to happen:

  • Clogged Fuel Filter: Over time and through normal use, your fuel filter will become dirty and clogged. When this happens, the flow of gasoline to your engine diminishes, which can cause hesitation and bucking.

  • Failing Fuel Pump: If your fuel pump begins to fail, it will not send the right amount of gasoline to the engine. Note that pumps can exhibit intermittent problems for a long time before they fail completely.

  • Failed Oxygen Sensor: If one of the oxygen sensors in your exhaust system has failed, the computer cannot monitor the emissions, and pressure may drop, creating hesitation and bucking.

  • Clogged EGR Valve: The EGR valve is a crucial component in the exhaust system. If it becomes clogged with carbon, it won’t operate correctly, and your engine may spit, sputter or hesitate.

  • Worn Out Spark Plugs and Wires: In order to combust gasoline correctly, your engine needs a steady spark and stream of electricity. This is provided by the spark plugs and wires. If they’re worn out, your engine may spit and sputter.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the engine and verify the hesitation and bucking, as well as when the condition occurs. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will connect a diagnostic computer to your car’s OBDII connection and read any trouble codes in the computer (even if the Check Engine light is not on, trouble codes may be stored). The mechanic may need to test drive the vehicle as well to verify the symptoms.

How important is this service?

You need reliable performance from your engine. Even if the hesitation and bucking doesn’t cause internal damage, it can be extremely disconcerting to drive while these symptoms are present. It can also compromise your safety on the road. Regular maintenance is the best way to protect against hesitation and bucking. Make sure you’re having the spark plugs, wires and fuel filter replaced regularly. You should also have any Check Engine light diagnosed immediately. One of our professional mechanics can troubleshoot, diagnose and repair your car, eliminating the hesitation and bucking during operation.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Mike

16 years of experience
17 reviews
Mike
16 years of experience
Mercedes-Benz 600SL V12-6.0L - Pre-purchase Car Inspection - Las Vegas, Nevada
Mike was on point and provided honest feedback on a pre purchase car inspection. Thank you Mike!

Albert

15 years of experience
46 reviews
Albert
15 years of experience
Mercedes-Benz C300 V6-3.0L - Car is hesitating and bucking - Rialto, California
Very detailed and patient inspection to my vehicle. He will explain and SHOW you what the issue might be, and explained as to why the issue is occurring..

Adrian

8 years of experience
17 reviews
Adrian
8 years of experience
Mercedes-Benz CLK350 V6-3.5L - Car is hesitating and bucking - Miami, Florida
Knowledgeable and professional service! Glad I got Adrian!

William

33 years of experience
69 reviews
William
33 years of experience
Mercedes-Benz E500 V8-5.0L - Brake Pads Replacement (Front) - Murrieta, California
William was great!!!! He was very Professional, on time, and gave great service!!! Also, gave me some great tips on what I may need in the future!!!

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does a Mechanic Check a Car Alternator's Volt Output?
Have Have you ever wondered how a mechanic checks your alternator? It’s not something that has to be done all that often, because usually alternators are maintenance-free, and they can last for up to 12 years without needing repairs. When...
How to Transfer a Car Title in Massachusetts
Without Without a title, there is no proof that you own the vehicle in question. The state of Massachusetts (and all other states in the country) require each vehicle to have a title in the name of the owner. When...
The 6 Most Important Tools For a Mobile Automotive Technician
Every professional mechanic should have a good scan tool, but a brake bleeding kit, air compressor, and multimeter accessory kit are also important.

Blinking engine light

The engine shaking and idling rough with a flashing check engine light is an indication you have a misfire in the engine. If you have a computer scan it should show ignition misfire codes to one or more cylinders misfiring....

How can I tell if my tensioners are keeping pressure on my serpentine belt?

Hi there. Many serpentine belt tensioners have a built in gauge that can help you determine if it is in need of replacement. Here is a link to a picture of a similar style tensioner and what to look at...

Making a clicking noise

What you are describing sounds like a failing CV joint (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). A CV (Constant Velocity) joint is a shaft that connects the transmission to the wheels, essentially transferring the power from the drive train directly to the wheels. The CV...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com