Mercedes-Benz 350SD Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mercedes-Benz 350SD Intake Manifold Gaskets Replacement is $630 with $84 for parts and $546 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercedes-Benz 350SDL6-3.4L Turbo DieselService typeIntake Manifold Gaskets ReplacementEstimate$773.44Shop/Dealer Price$840.25 - $985.38
Show example Mercedes-Benz 350SD Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(13)

Rating Summary
10
1
0
0
2
10
1
0
0
2

Eric

15 years of experience
73 reviews
Eric
15 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Intake Manifold Gaskets - Jonesboro, Georgia
Experience was great but he only replaced the tensioner and serpentine belt not the intake manifold gasket...but he did a great job

Tabitha

18 years of experience
379 reviews
Tabitha
18 years of experience
Mercedes-Benz E350 V6-3.5L - Intake Manifold Gaskets - San Diego, California
Very friendly, knowledgeable and passionate about her work! Thank you.

Lavell

29 years of experience
405 reviews
Lavell
29 years of experience
Mercedes-Benz ML350 V6-3.5L - Intake Manifold Gaskets - Oakland, California
Great Job! Excellent Service!

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Mercedes-Benz E500 V8-5.0L - Intake Manifold Gaskets - Austin, Texas
On time, went out of his way to help, excellent service , will use again !!!

Excellent Rating

(13)

Rating Summary
10
1
0
0
2
10
1
0
0
2
Number of Mercedes-Benz Intake Manifold Gaskets Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Fix Streaky Wax On a Car
Whenever Whenever you wax your car, you expect the end result to be a clean, bright finish that protects your paint. Even though applying wax to your car’s finish is a pretty straightforward process, it can turn out poorly if...
The Guide To Colored Curb Zones in Idaho
Idaho Idaho parking laws: understanding the basics Idaho drivers know that they need to be careful and they need to obey the laws when they are out on the roadways. However, they also need to make sure they are abiding...
How to Buy a Good Quality Power Steering Fluid Reservoir
Your Your vehicle runs smoothly while you’re driving down the road due to the power steering fluid, making it important to assure that the fluid doesn’t leak. Check your power steering fluid reservoir regularly for cracks and chips and leakage...

How do I use the auto down window?

If your vehicle is equipped with the auto down window, then you can roll the driver’s window down all the way, with only a quick button press. To use the auto down feature, press the driver’s Power Window switch down...

partially engaged brakes

You will need to jack up the front wheels and see if the tires will turn freely. If both front wheels are binding then you should try to loosen the brake lines that connect to the master cylinder to see...

My car idles rough at stop lights.

There are a couple of things that may cause this situation. A clogged engine air filter or dirty throttle body may not allow the proper amount of air to flow while the engine is idling and cause a low, rough...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com