Mercedes-Benz 300TE Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz 300TE Power Steering Pressure Hose Replacement is $344 with $190 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Mercedes-Benz 300TEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$910.08Shop/Dealer Price$1082.44 - $1575.40
1990 Mercedes-Benz 300TEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$577.19Shop/Dealer Price$684.87 - $999.97
1993 Mercedes-Benz 300TEL6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$894.76Shop/Dealer Price$1061.94 - $1551.02
1992 Mercedes-Benz 300TEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$577.19Shop/Dealer Price$684.91 - $1000.05
1991 Mercedes-Benz 300TEL6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$577.19Shop/Dealer Price$687.75 - $1005.01
Show example Mercedes-Benz 300TE Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Mercedes-Benz 300TE L6-3.0L - Fuel Filter - Nashville, Tennessee
Joe is the best!

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Mercedes-Benz 300TE L6-3.0L - Car AC Repair - Pittsburg, California
Joshua was awesome! Super friendly and knowledgeable. Would definitely use his services again!

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Mercedes-Benz 300TE L6-3.2L - Car is not starting - Austin, Texas
Patrick went above and beyond and I completely trust him. Although we weren’t able to fix the car it wasn’t his fault. I have had several mechanics and Patrick is thorough, knowledgeable and professional, but most of all...Fair!

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Mercedes-Benz 300TE L6-3.0L - Cooling System Flush - Irvine, California
Timely, courteous and professional!

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Mercedes-Benz 300TE services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Check the Voltage of a Car Battery
There are few things more frustrating than discovering that your car won’t start because the battery is dead. A mechanic can measure...
P2247 OBD-II Trouble Code: Oxygen Sensor Reference Voltage Circuit Open - Bank 2 Sensor 1
P2247 P2247 code definition The P2247 diagnostic trouble code is an indication that there is a problem with the bank 2 sensor 1 oxygen (O2) sensor reference voltage circuit. Related Trouble Codes: P2243 OBD-II Trouble Code: O2 Sensor Ref Voltage...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Virginia
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Virginia through the Universal Technical Institute.

Loud noise while driving

There is a TSB for a possible crack that can form in the right side exhaust tube, and cause a noise characteristic similar to what you are describing. The pipe will have to repaired, or replaced, based on the damage...

Car not driveable

Hello, An inspection of the vehicle will have to be done. The possibility of an internal failure of the transmission has occurred. This would still need to be confirmed. If you'd like, a certified Your Mechanic technician can come...

Heater want stay hot

The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com