Mercedes-Benz 190E Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(23)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(23)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz 190E Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercedes-Benz 190EL6-2.6LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1993 Mercedes-Benz 190EL6-2.6LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1993 Mercedes-Benz 190EL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1987 Mercedes-Benz 190EL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1985 Mercedes-Benz 190EL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1989 Mercedes-Benz 190EL6-2.6LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1992 Mercedes-Benz 190EL4-2.3LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1991 Mercedes-Benz 190EL4-2.3LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Mercedes-Benz 190E Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(23)

Rating Summary
20
2
1
0
0
20
2
1
0
0

Hugo

22 years of experience
88 reviews
Hugo
22 years of experience
Mercedes-Benz 190E L6-2.6L - Door will not shut - Silver Spring, Maryland
Hugo arrived ahead of time which was a welcome surprise especially for a car door that would not close. He fixed it within an hour and it has worked fine since that time, even though I still may need to get the part door actuator and have it replaced, he told me.

Trevor

22 years of experience
185 reviews
Trevor
22 years of experience
Mercedes-Benz 190E L4-2.3L - Tie Rod End Replacement (Front Right Inner, Front Left Outer) - San Diego, California
Courteous and knowledgeable. Fast work.

Cyrus

35 years of experience
110 reviews
Cyrus
35 years of experience
Mercedes-Benz 190E L4-2.3L - Car is not starting - Atlanta, Georgia
On time, and very knowledgeable and professional

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mercedes-Benz 190E L6-2.6L - Fuel Filter - San Francisco, California
Very friendly and thorough, true professional !

Excellent Rating

(23)

Rating Summary
20
2
1
0
0
20
2
1
0
0
Number of Mercedes-Benz 190E services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does an AC Condenser Last?
Your Your car’s air conditioner system has a lot of different components, including the compressor, the receiver dryer, the hoses, the evaporator, and the condenser. The condenser is the component that converts gas into cooled liquid. Most people do not...
How Long Does a Hazard / Turn Signal Flasher Last
Staying Staying safe when navigating the busy roadways out there can be a lot easier said than done. Most cars have a variety of different systems built in to increase the overall level of safety that a car has. The...
P2518 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor “B” Circuit High
P2518 P2518 trouble code definition A/C Refrigerant Pressure Sensor “B” Circuit High What the P2518 code means P2518 is an OBD-II generic code for the engine control module (ECM) detecting the A/C refrigerant pressure sensor B is shorted to reference...

Can I drive my car with the rotors warped until I get it fixed next week?

Hi, thanks for your question. There should not be any major concern to drive with them this way assuming it is still drivable other than the vibration and noise as you have experienced. Be sure to give yourself extra time...

struggling to start after fuel pump assembly replacement

Hi there. It is possible that there is an issue with the fuel pump, but that is not likely. If the engine is hard to start then that can be caused by a sensor problem. I usually start by checking...

Won't start and has spark, 49 psi in fuel pressure, and it ran when I parked the car. Why won't it start?

Hi there. Check the starter and see if is clicking when you turn the key. If the starter is clicking, then either the starter relay or the starter solenoid is not working. If there is no click and the starter...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com