Mazda CX-5 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(202)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(202)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mazda CX-5 Intake Manifold Gaskets Replacement is $274 with $65 for parts and $209 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mazda CX-5L4-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$382.08Shop/Dealer Price$436.36 - $549.68
2016 Mazda CX-5L4-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$338.08Shop/Dealer Price$392.40 - $505.75
2015 Mazda CX-5L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$344.88Shop/Dealer Price$400.89 - $519.35
2018 Mazda CX-5L4-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$522.26Shop/Dealer Price$597.82 - $734.53
2016 Mazda CX-5L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$344.88Shop/Dealer Price$400.93 - $519.41
2017 Mazda CX-5L4-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$522.26Shop/Dealer Price$597.91 - $734.68
2014 Mazda CX-5L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$349.08Shop/Dealer Price$403.09 - $516.22
2013 Mazda CX-5L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$355.88Shop/Dealer Price$412.41 - $531.26
Show example Mazda CX-5 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(202)

Rating Summary
194
5
1
0
2
194
5
1
0
2

Jesus

6 years of experience
17 reviews
Jesus
6 years of experience
CX-5 2016 - Tire Rotation - San Diego, CA
Jesus was on time and did a great job telling me about the condition of my car. Speedy service too!

Jose

6 years of experience
63 reviews
Jose
6 years of experience
CX-5 2016 - Oil Change - SF, CA
Jose was very friendly and on time. He did a very fast job and I am very happy with the service

Jose

6 years of experience
63 reviews
Jose
6 years of experience
CX-5 2016 - 50 Point Inspection - SF, CA
Jose was very friendly and on time. He did a very fast job and I am very happy with the service

Travis

20 years of experience
29 reviews
Travis
20 years of experience
CX-5 2016 - Control Arm Assembly - Houston, TX
Travis was early, very helpful and understanding. He completed the job in record time and my car has never driven better.

Excellent Rating

(202)

Rating Summary
194
5
1
0
2
194
5
1
0
2
Number of Mazda CX-5 services completed
2222+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Drive Safely without Mirrors If You Have To
Your Your car has mirrors for a very good reason: you need to see behind you and beside you at all times, or your safety is compromised. You’ll also be a threat to other people on the road. But what...
A Buyer’s Guide to the 2012 Toyota Sequoia
If If you need to haul a crowd and you want the power needed to haul all the toys as well, the 2012 Toyota Sequoia might be a perfect fit. While it doesn’t have the hauling capacity of some of...
How to Fight a Speeding Ticket
Speeding ticket can be avoided before you get a ticket or they can be contested in court. Stay calm and be polite to beat a speeding ticket.

Opinion on using the Lucas transmission additive as a prevention

For modern cars, a lot of them are pretty particular on what fluid they use. If you just add the fluid in the mix, it may not be compatible with the fluid that's in your transmission. If your transmission is...

Changed battery and the fuel pump and car still slow to start. When it does start it shuts off without warning. Fuel filter is fine.

Hi there. The battery (https://www.yourmechanic.com/services/battery-replacement) could be dead even though it has a full charge. There could be a dead cell or an over charged cell. Have the battery checked with a load tester. This will place a load on...

Vibration issue when going 60mph and up. Speed related.

Shaking or vibrating at high speeds is often times related to tires that may be out of balance, low on air, potentially a badly aligned front end, failing suspension components or ball joints (https://www.yourmechanic.com/services/ball-joint-front-replacement). When any of these things are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com