Mazda B2600 Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Mazda B2600 Spark Plug Replacement is $157 with $17 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mazda B2600L4-2.6LService typeSpark Plug ReplacementEstimate$383.48Shop/Dealer Price$444.20 - $618.26
1991 Mazda B2600L4-2.6LService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.42 - $606.16
1993 Mazda B2600L4-2.6LService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.45 - $606.20
1992 Mazda B2600L4-2.6LService typeSpark Plug ReplacementEstimate$374.47Shop/Dealer Price$433.45 - $606.20
Show example Mazda B2600 Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Gregory

12 years of experience
27 reviews
Gregory
12 years of experience
Mazda B2600 L4-2.6L - Car is not starting - Fresno, California
Good communication, thorough check of the vehicle, left the vehicle in better shape than he found it outside of the reason for the call (replaced an old nasty bolt, filled tires with air, etc.), and was even nice to my dog.

Nick

15 years of experience
90 reviews
Nick
15 years of experience
Mazda B2600 L4-2.6L - Coolant is leaking - Sacramento, California
Very professionable

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Mazda B2600 L4-2.6L - Inspection / Diagnostics - Riverside, California
Jay was very professional and personable and he explained things in terms that were easy to understand. I highly recommend him

David

13 years of experience
2 reviews
David
13 years of experience
Mazda B2600 L4-2.6L - Car is not starting - Riverside, California
he was very helpful even walked 2 orielys with me

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mazda B2600 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

What Is the Blind Spot in a Car
When When you’re behind the wheel, you have to pay attention to what other drivers are doing. However, that’s not limited to those in front of you. You also have to pay attention to drivers behind you, and often to...
How to Change Your Oil
Changing your oil is an important maintenance service. Prevent major engine failure with regular changes.
Symptoms of a Bad or Failing Fuel Filler Cap
Common signs include the cap not tightening properly, a fuel smell in the car, and the Check Engine Light coming on.

What happens if the power steering system stops working?

The power steering system in your car is not “essential”, but it sure does help. If you’ve never driven a car without power steering, count yourself lucky. Just turning the wheel was a chore. The power steering system in your...

Windshield wipers stopped working.

I would recommend that you seek help from a certified mechanic to diagnose why your wipers are not working (https://www.yourmechanic.com/services/windshield-wiper-washer-system-inspection). He will have the necessary test equipment to check the electronics of the wiper system. He will be able to...

The etc light came on

Hi Daniel. Thanks for submitting your question tonight. The ETC light is an indication of a fault with the Electronic Throttle Control. This system is responsible for relaying your physical input when applying pressure to the throttle pedal and sending...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com