Mazda B2200 Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Mazda B2200 Exhaust Gas Recirculation/EGR Valve Replacement is $489 with $349 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mazda B2200L4-2.2LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$998.02Shop/Dealer Price$1212.38 - $1847.34
1991 Mazda B2200L4-2.2LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$989.01Shop/Dealer Price$1201.60 - $1835.24
1990 Mazda B2200L4-2.2LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$989.01Shop/Dealer Price$1201.62 - $1835.28
1993 Mazda B2200L4-2.2LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$989.01Shop/Dealer Price$1201.62 - $1835.28
Show example Mazda B2200 Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(14)

Rating Summary
12
1
0
1
0
12
1
0
1
0

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Mazda B2200 L4-2.2L - Radiator - Snellville, Georgia
Wel done

Ramiro

22 years of experience
103 reviews
Ramiro
22 years of experience
Mazda B2200 L4-2.2L - Pre-purchase Car Inspection - Seattle, Washington
Very professional and friendly! Ramiro was excellent and a very good communicator. I would love to have him as my mechanic in the future!

Tinashe

14 years of experience
781 reviews
Tinashe
14 years of experience
Mazda B2200 L4-2.2L - Car is not starting - Avondale Estates, Georgia
excellent

Adam

11 years of experience
5 reviews
Adam
11 years of experience
Mazda B2200 L4-2.2L - Clutch Master Cylinder - Monroe, Washington
Adam is a excellent Manchic.

Excellent Rating

(14)

Rating Summary
12
1
0
1
0
12
1
0
1
0
Number of Mazda B2200 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Louisville, Kentucky
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Louisville is NAPA Auto Parts.
P2631 OBD-II Trouble Code: O2 Sensor Pumping Current Trim Circuit High Bank 2 Sensor 1
What What the P2631 code means? P2631 is an OBD-II generic code for the engine control module (ECM) detecting an open or short circuit in the Air Fuel Radio (A/F) or O2 sensor, causing a high voltage at the signal...
How to Get Your Car Out of Impound
In In every city, county, and state, there are laws (https://www.yourmechanic.com/article/5-essential-things-to-know-about-traffic-laws) regarding where you can park. You can’t park in a way that blocks sidewalks, crosswalks, or intersections in any way. You can’t park your car in front of a...

Car stalling every few days and needs jump. Brand new battery and EGR valve.

Hello, being that the power door locks are controlled by the body control module, a scanner needs to be connected to see if there are any codes present. Also, with a scanner connected, there might be inputs that can be...

Swapping 98 5.9l engine for 96 5.2l

The first clue is the EGR system. One engine has it and the other does not. Even though it may be illegal for you to change your vehicle engine from a 98 to a 96, as long as it is...

My clutch is not working.

Go under the vehicle and see if the return spring has came off the slave cylinder on the clutch assembly. If the return spring is there, then look to see if the slave cylinder is pushed all the way out....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com