Mazda 3 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Mazda 3 Car Thermostat Replacement is $282 with $86 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Mazda 3L4-2.3LService typeCar Thermostat ReplacementEstimate$466.18Shop/Dealer Price$530.00 - $709.31
2013 Mazda 3L4-2.0LService typeCar Thermostat ReplacementEstimate$391.51Shop/Dealer Price$437.39 - $568.84
2011 Mazda 3L4-2.3L TurboService typeCar Thermostat ReplacementEstimate$439.37Shop/Dealer Price$497.25 - $664.63
2012 Mazda 3L4-2.5LService typeCar Thermostat ReplacementEstimate$439.37Shop/Dealer Price$497.25 - $664.62
2010 Mazda 3L4-2.0LService typeCar Thermostat ReplacementEstimate$452.67Shop/Dealer Price$516.08 - $695.09
2008 Mazda 3L4-2.3L TurboService typeCar Thermostat ReplacementEstimate$466.11Shop/Dealer Price$530.88 - $718.47
2004 Mazda 3L4-2.3LService typeCar Thermostat ReplacementEstimate$452.67Shop/Dealer Price$513.90 - $691.26
2012 Mazda 3L4-2.3L TurboService typeCar Thermostat ReplacementEstimate$439.37Shop/Dealer Price$497.25 - $664.62
Show example Mazda 3 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Derrick

5 years of experience
124 reviews
Derrick
5 years of experience
3 2004 - Thermostat - Hercules, CA
Awesome job!

David

10 years of experience
372 reviews
David
10 years of experience
3 2006 - Thermostat - Canton, GA
David was promptly on time and very cordial. Even when encountering a problem with troublesome bolts he still managed to replace my thermostat and identify potential issues I might want to watch out for in the future. Excellent service.

Andrew

10 years of experience
440 reviews
Andrew
10 years of experience
3 2006 - Thermostat - Portland, OR
Andrew was very friendly and did a fantastic job. I would definitely go with him again the next time my car needs work.

Kwante

12 years of experience
11 reviews
Kwante
12 years of experience
3 2011 - Windshield Wiper Blade - Towson, MD
Responsive, quick, and thorough. Excellent job!

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Mazda 3 Car Thermostat Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Sunshade
Sunshades Sunshades provide you with protection from the sun’s glare while you’re driving or protect the steering wheel and dash from heat and light while you’re parked. There are several types offered on the market – you can purchase replacement...
P0019 OBD-II Trouble Codes: Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B)
P0019 P0019 code definition Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor B) What the P0019 code means P0019 is the OBD-II generic code indicating that the crankshaft and Variable Valve Timing (VVT) position sensor B for bank 2...
10 Best Stores to Buy Auto Parts in Fort Worth, Texas
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Fort Worth is O’Reilly Auto Parts.

Surges of power on downhill

The issue you are having sound like either the throttle is not returning to a closed position or your transmission went into overdrive lock up when you let off of the accelerator pedal. Contact YourMechanic to go through a thorough...

What climate control elements can be controlled from the touchscreen?

If your Fusion has the touchscreen navigation system installed, then it’s tied into your Automatic Climate Control system as well. You’ll find that some of the physical controls on the HVAC system are duplicated on the touchscreen (that way, if...

My alarm is randomly going off

There are numerous reasons this may be happening. However, there is a technical service bulletin (TSB) #09-BE-026 pertaining to alarm system self activation due to a defective hood switch pad. The TSB states: The vehicle alarm system may intermittently sound...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com