logo

Mazda 3 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(6)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mazda 3 Control Arm Assembly Replacement is $306 with $138 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mazda 3L4-2.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$594.70Shop/Dealer Price$680.11 - $921.74
2010 Mazda 3L4-2.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$651.07Shop/Dealer Price$768.77 - $1116.52
2004 Mazda 3L4-2.3LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$624.55Shop/Dealer Price$735.65 - $1063.54
2007 Mazda 3L4-2.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$718.03Shop/Dealer Price$852.50 - $1250.49
2013 Mazda 3L4-2.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$696.74Shop/Dealer Price$811.23 - $1141.20
2005 Mazda 3L4-2.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$696.74Shop/Dealer Price$808.83 - $1137.00
2018 Mazda 3L4-2.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$628.93Shop/Dealer Price$744.61 - $1086.60
2006 Mazda 3L4-2.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$578.48Shop/Dealer Price$660.75 - $900.03
Show example Mazda 3 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mazda 3 Control Arm Assembly Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(6)
Rating Summary
5
0
0
0
1
5
0
0
0
1

Excellent Rating

(6)
Rating Summary
5
0
0
0
1
5
0
0
0
1
Number of Mazda 3 Control Arm Assembly Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Choose an Environmentally Friendly Vehicle
Auto manufacturers are currently under pressure to create new vehicles that are more environmentally friendly and to improve the fuel efficiency of the vehicles they currently offer. For consumers, the trend to “go green” is more than just an environmentally...
Read more
How Long Does an Intermittent Wiper Relay Last?
Being Being able to remove the water from a windshield while driving is an essential part of staying safe. Most of the modern vehicles out there have intermittent wipers that allow the driver to change the speeds at which their...
Read more
How Long Does an Ignition Relay Last?
When When trying to crank a car, you will need a few vital components to be working in order for the process to be successful. On most cars, there is an intricate network of relays and switches that allow for...
Read more

Car makes popping noise

Hello. The vehicles cruise control system uses an actuator and cable to open the throttle body and hold cruise. The throttle cable and cruise control cable operate independently, but are both linked to the throttle body. Have an experienced technician...
Read more

I hit a pothole and my heat and ac went out, how can i fix it

If the issue is no air flow because the blower motor does not circulate air, whether hot or cold air, the jarring hit from the pothole might have somehow caused an electrical fault. If the car hit that hard, be...
Read more

Hi! I changed my oil yesterday and must have used the wrong filter because my [engine](/topics-engine-toyota/) cut off and I had to pull over. Turns out the filter fell off and oil splashed all over the engine block. Got it towed, changed the oil again and used the correct filter but now the car won't start

Read more
  1. Home
  2. Estimates
  3. Mazda
  4. 3
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE