Lincoln MKZ Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(191)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(191)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Lincoln MKZ Valve Cover Gasket Replacement is $311 with $45 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Lincoln MKZL4-2.0L TurboService typeValve Cover Gasket ReplacementEstimate$989.70Shop/Dealer Price$1087.86 - $1317.12
2011 Lincoln MKZV6-3.5LService typeValve Cover Gasket ReplacementEstimate$1002.54Shop/Dealer Price$1133.34 - $1499.74
2018 Lincoln MKZL4-2.0L TurboService typeValve Cover Gasket ReplacementEstimate$402.88Shop/Dealer Price$437.79 - $534.56
2008 Lincoln MKZV6-3.5LService typeValve Cover Gasket ReplacementEstimate$1097.54Shop/Dealer Price$1252.24 - $1690.00
2015 Lincoln MKZV6-3.7LService typeValve Cover Gasket ReplacementEstimate$1105.97Shop/Dealer Price$1241.40 - $1587.32
2017 Lincoln MKZL4-2.0L HybridService typeValve Cover Gasket ReplacementEstimate$919.89Shop/Dealer Price$991.17 - $1184.32
2016 Lincoln MKZV6-3.7LService typeValve Cover Gasket ReplacementEstimate$912.21Shop/Dealer Price$987.46 - $1179.27
2014 Lincoln MKZL4-2.0L TurboService typeValve Cover Gasket ReplacementEstimate$948.25Shop/Dealer Price$1032.38 - $1251.12
Show example Lincoln MKZ Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(191)

Rating Summary
179
7
1
0
4
179
7
1
0
4

Andrian

33 years of experience
185 reviews
Andrian
33 years of experience
Lincoln MKZ V6-3.7L - Check Engine Light is on - Fort Lauderdale, Florida
Showed up on time and was extremely informative and communicative throughout his work. Definitely recommend.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Lincoln MKZ V6-3.5L - Clutch Fluid - Houston, Texas
I had a great experience. Very helpful

Richard

12 years of experience
450 reviews
Richard
12 years of experience
Lincoln MKZ V6-3.5L - Door does not lock or open - Washington, District of Columbia
Richard exceeded expectations. He was on time, courteous, very knowledgable.. He explained everything as he was working and offered sincere recommendations. I commend him for his profession service and your company for your wonderful service.

Mike

21 years of experience
110 reviews
Mike
21 years of experience
Lincoln MKZ V6-3.5L - Door will not open - Jonesboro, Georgia
On time professional and courteous.

Excellent Rating

(191)

Rating Summary
179
7
1
0
4
179
7
1
0
4
Number of Lincoln MKZ services completed
2101+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

How to Test an Ignition Coil
If you suspect your car has a faulty ignition coil, use a multimeter to test it out in 7 straightforward steps.
A Guide to Tire Safety
When When sitting behind the wheel of a car, there are two things that most drivers want: to reach their destination, and to do so as safely as possible. This means having a car that is in good condition, and...
Symptoms of a Bad or Failing Parking Brake Drum
If your car's parking brakes don't hold or just work poorly overall, you may need to replace the parking brake drum.

Advice on having the transmission flushed

Hello there, changing the transmission fluid (https://www.yourmechanic.com/article/how-long-does-transmission-fluid-last) at the recommended service intervals helps the transmission last longer and reduces chances of faults down the line. Mercedes recommends a transmission fluid service at 40,000 miles as part of the 40,000 mileage...

Need to know if I should replace my turbo or not

Hi, thanks for writing in. The turbo system is comprised of several different components. Without knowing the exact trouble code, it would be hard to guess at what is going on. There could be a bad sensor, a leaking intake...

95 nissian maxima have replaced fuel pump, crank sensors both still car stalling and sometimes won't start

Hi Sonja. Thanks for contacting us today. Usually when a fuel pump or crankshaft sensor is not working, the vehicle will not start at all. It's more likely that you have a fuel system restriction or the engine is having...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com