Lincoln Blackwood Combination Switch Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,621)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,621)

Combination Switch Assembly Replacement Service

How much does a Combination Switch Assembly Replacement cost?

On average, the cost for a Lincoln Blackwood Combination Switch Assembly Replacement is $470 with $334 for parts and $136 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Lincoln BlackwoodV8-5.4LService typeCombination Switch Assembly ReplacementEstimate$829.95Shop/Dealer Price$1015.93 - $1530.86
Show example Lincoln Blackwood Combination Switch Assembly Replacement prices

What is the Combination Switch Assembly all about?

A combination switch assembly has several functions. This component is connected to your turn signal indicator and controls all of the functions on the lever. The combination switch assembly adjusts the high and low beams on your headlights, indicates when you are turning left or right, and activates the hazard lights when needed. It turns on the windshield wipers in the front as well as the rear if equipped. The switch also activates the windshield washer fluid.

The switch is located inside the steering column and connects to the lever with multiple wires that run to the various components that the switch controls. When the switch fails, none of the components attached to it will work. However, a faulty switch may work periodically or for some components and not others until it fails completely.

Keep in mind:

  • The combination switch assembly activates and adjusts all components attached to the turn signal lever.
  • The steering column must be removed to access the switch.
  • The combination switch will need to be replaced not repaired.
  • The combination switch will vary based on make and model and even year because different controls have been added to the turn signal lever.

How it's done:

  • The combination switch assembly is verified that it needs to be replaced. The battery is then disconnected.

  • The steering column trim panels are removed for access and the defective combination switch assembly is disconnected and removed.

  • The new combination switch assembly is installed and connected.

  • The trim panels are reinstalled. The battery is then reconnected and the combination switch assembly is tested for operation.

  • The vehicle is road tested to ensure proper operation of the combination switch assembly.

Our recommendation:

The same symptoms that indicate a failed combination switch assembly may also be caused by other problems such as blown fuses. Have one of our expert mechanics check out the issue and rule out other causes before replacing the combination switch.

What common symptoms indicate you may need to replace the Combination Switch Assembly?

  • Headlights won’t adjust from high to low beam or vice-versa
  • Turn signals fail to operate
  • Windshield wipers won’t turn on or washer fluid isn’t activated

How important is this service?

If the combination switch assembly stops working, you won’t be able to drive after dark because the headlights won’t come on. You could also get a traffic violation for failing to signal when turning or even cause an accident. Have it inspected and replaced if necessary as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lincoln mechanics

Real customer reviews from Lincoln owners like you.

Excellent Rating

(1,621)

Rating Summary
1,503
71
13
6
28
1,503
71
13
6
28

Mike

13 years of experience
176 reviews
Mike
13 years of experience
Lincoln Blackwood V8-5.4L - Control Arm Assembly Replacement (Front Lower Left) - Raleigh, North Carolina
Great work and timely service

Mack

22 years of experience
114 reviews
Mack
22 years of experience
Lincoln Town Car V8-4.6L - Engine is misfiring - Grand Prairie, Texas
I believe I have found my mechanic for life. Mack is very knowledgeable and professional. He even provided me with suggestions of what I should do next to get my baby back to top performance.

Matthew

33 years of experience
1279 reviews
Matthew
33 years of experience
Lincoln Town Car V8-4.6L - Serpentine/Drive Belt - Norfolk, Virginia
Did an excellent job. Very professional. Knew my model of car like the back of his hand.

Richard

11 years of experience
265 reviews
Richard
11 years of experience
Lincoln Navigator V8-5.4L - Check Engine Light is on Inspection - Nashville, Tennessee
Thank you for the honest assessment.

Excellent Rating

(1,621)

Rating Summary
1,503
71
13
6
28
1,503
71
13
6
28
Number of Lincoln services completed
17831+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lincoln MECHANICS
700+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Florida
The The state of Florida requires that all drivers carry a minimum liability insurance, or “financial responsibility” on their vehicles in order to operate those vehicles legally. The minimum liability insurance required for vehicle owners under this law is as...
P2134 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch F Circuit Intermittent
What What the P2134 code means? P2134 is an OBD-II generic code for the engine control module (ECM) detecting the throttle pedal position sensor F has an intermittent sensor return to the ECM What causes the P2134 code? The ECM...
How to Replace a Door Mirror
The side view mirror needs a replacement if it is hanging off its housing or if the electronics are malfunctioning within the mirror.

Car not starting.

Hi, there are three things you car need to start Air/fuel, compression, ignition. If one of these things is missing the car will not start. I would recommend having a technician come out and test these systems for failure. (https://www.yourmechanic.com/services/car-is-not-starting-inspection)...

Check Engine Light came on gave me a O2 sensor code. A week later the car broke down and won't start. It now has catalytic converter code.

It is helpful if you include the codes numbers. There are numerous O2 sensor and catalytic converter codes. There are two O2 sensors on your car. One is monitors the fuel ratio and the PCM (powertrain control module) uses it...

I have a 2012 Jeep [Compass](/topics-compass/) that has a red lightning bolt light and check engine light that is intermittent. I replaced the throttle body and the accelerator pedal sensor. I did the recalibration with the pedal and all lights stayed off for about 30 min. Then they came back. I went back through made sure all.of the connections and the hoses were tight and good. Started it up and same thing. I had a friend with a shop scanner come and check and he saw circuit A and B looked good they were running the same however while it sat idle the red lightning bolt came up. I don't know what to do next.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com