Lexus RX350 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(426)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(426)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Lexus RX350 Car Thermostat Replacement is $285 with $89 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$1018.88Shop/Dealer Price$1205.46 - $1735.41
2009 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$382.65Shop/Dealer Price$431.70 - $568.77
2018 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$471.69Shop/Dealer Price$541.11 - $743.54
2007 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$382.65Shop/Dealer Price$431.76 - $568.87
2011 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$484.84Shop/Dealer Price$541.65 - $684.52
2015 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$514.40Shop/Dealer Price$573.70 - $735.07
2014 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$483.90Shop/Dealer Price$535.11 - $673.27
2008 Lexus RX350V6-3.5LService typeCar Thermostat ReplacementEstimate$382.65Shop/Dealer Price$431.76 - $568.87
Show example Lexus RX350 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(426)

Rating Summary
401
10
6
2
7
401
10
6
2
7

Juan

10 years of experience
47 reviews
Juan
10 years of experience
RX350 2007 - Serpentine/Drive Belt - Benicia, CA
No muss, no fuss. Just great work.

Tyrec

12 years of experience
10 reviews
Tyrec
12 years of experience
RX350 2010 - Pre-purchase Car Inspection - Cumberland, RI
Ty was very professional, caring, and comprehensive in his pre-purchase inspection of an Lexus RX350. Thank you!

Pierre

7 years of experience
223 reviews
Pierre
7 years of experience
RX350 2008 - Windshield Wiper Blade - Boston, MA
Very professional and knowledgeable

Raymond

35 years of experience
252 reviews
Raymond
35 years of experience
RX350 2015 - Axle / CV Shaft Assembly - Las Vegas, NV
Raymond was on time and efficient!

Excellent Rating

(426)

Rating Summary
401
10
6
2
7
401
10
6
2
7
Number of Lexus RX350 services completed
4686+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Do Wiring Harnesses Last?
Car wiring harnesses connect all the different electrical systems and components in a vehicle. Wiring harnesses can last the lifetime of the vehicle.
How to Buy Good Quality Headlights
You You may not even think about your headlights until you’re having problems with them, but head lights are an important part of your vehicle’s safety systems. They allow other cars and trucks to see you during the day, and...
How Long Does a Brake Wheel Cylinder Last?
One One of the most important functions that a car performs every time that it is operated is braking. Without a properly working braking system, it would not be safe to operate your car. With all of the various components...

Fuse blown

Yes this is most definitely a short. A 30 amp fuse is a large fuse, and in your vehicle it feeds the engine control module relay. A short means that a power wire is going to ground. This is usually...

My ABS light went up

In my experience the hub and sensor both needs to be replaced. The sensor will most likely break off when trying to remove it. If you do manage to get it out, the front hub bearings wear will cause erratic...

2012 chrysler 200s 3.6l overheats when a/c is on and it pressurizes and be lows it out the overflow relief hose

Hi There, Overheating with the AC on is generally caused by a couple of possibilities. When the AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement) is beginning to fail, this may incur an increased load on the motor as it works harder than usual to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com