Lexus RC F Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Lexus RC F Control Arm Assembly Replacement is $615 with $475 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Lexus RC FV8-5.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1136.72Shop/Dealer Price$1378.72 - $2095.00
2017 Lexus RC FV8-5.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1271.90Shop/Dealer Price$1513.61 - $2229.68
2017 Lexus RC FV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1096.71Shop/Dealer Price$1336.25 - $2050.68
2017 Lexus RC FV8-5.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1096.71Shop/Dealer Price$1336.25 - $2050.68
2015 Lexus RC FV8-5.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1096.71Shop/Dealer Price$1342.72 - $2062.00
2018 Lexus RC FV8-5.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1286.50Shop/Dealer Price$1528.77 - $2245.26
2017 Lexus RC FV8-5.0LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1271.90Shop/Dealer Price$1513.70 - $2229.83
2018 Lexus RC FV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1125.91Shop/Dealer Price$1365.82 - $2080.53
Show example Lexus RC F Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Lexus RC F V8-5.0L - Oil Change - San Antonio, Texas
great all around; helped to look for things to watch and listen for in the future in addition to doing great work on fluids and oil

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Lexus RC F V8-5.0L - Oil Change - San Antonio, Texas
Excellent work; so thoughtful to give honest assessment of which services are necessary and which can wait.

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Lexus RC F V8-5.0L - Oil Change - San Antonio, Texas
Outstanding service and quality

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Lexus RC F V8-5.0L - Oil Change - San Antonio, Texas
Great work

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Lexus RC F services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Speedometer Cable Last?
Speed Speed limits are there to help provide better safety on the road. They’re not set arbitrarily. You need to know how fast you’re traveling in order to ensure that you’re both safe, and in compliance with the law. The...
A Buyer’s Guide to the 2012 Chevrolet Cruze
Until Until just the past few years, the Toyota Corolla and the Honda Civic were the kings of the compact car class, and domestic manufacturers had almost nothing in the way of competition for these models. With the 2012 Chevrolet...
Veteran and Military Driver Laws and Benefits in Indiana
The The state of Indiana offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran license plate Indiana offers a...

Stuck in Valet mode. Cannot unlock trunk. Need to reset in order to use radio/nav/electronic systems

Hello, thanks for writing in about your Jaguar XF. You need to make sure you are not using the valet key for the vehicle or you will not be able to get into the trunk or operate components. Try another...

my lincoln town car rear suspension is low what do i do

The vehicle height could be low due to an air compressor/control failure, break in an air line, faulty air spring, faulty level control sensor and other causes. These systems are fairly straightforward and thus if you request an air spring...

My tail or Tag lights aren't working

Hi Cristina. The rear lights are typically powered by an electrical relay, that supplies power to individual lights as input is received from the accessory module. For example, when you turn on the headlights, a signal from the module sends...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com