Lexus HS250h Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Lexus HS250h Intake Manifold Gaskets Replacement is $540 with $92 for parts and $448 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Lexus HS250hL4-2.4L HybridService typeIntake Manifold Gaskets ReplacementEstimate$679.40Shop/Dealer Price$745.41 - $898.08
2011 Lexus HS250hL4-2.4L HybridService typeIntake Manifold Gaskets ReplacementEstimate$650.57Shop/Dealer Price$706.69 - $851.94
2012 Lexus HS250hL4-2.4L HybridService typeIntake Manifold Gaskets ReplacementEstimate$650.57Shop/Dealer Price$706.83 - $852.19
Show example Lexus HS250h Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(24)

Rating Summary
22
1
1
0
0
22
1
1
0
0

Chelsey

17 years of experience
10 reviews
Chelsey
17 years of experience
Lexus HS250h L4-2.4L Hybrid - Car Battery Replacement - Benicia, California
Chelsey was amazing. Thank you for helping us with our car!

Jamahl

21 years of experience
830 reviews
Jamahl
21 years of experience
Lexus HS250h L4-2.4L Hybrid - Check Engine Light is on - Winter Garden, Florida
Thanks!

Andrew

24 years of experience
169 reviews
Andrew
24 years of experience
Lexus HS250h L4-2.4L Hybrid - Oil Change - Plano, Texas

Adam

18 years of experience
263 reviews
Adam
18 years of experience
Lexus HS250h L4-2.4L Hybrid - ABS Light is on Inspection - Boca Raton, Florida
What an excellent service. Adam was very professional and thorough, I will continue to use the company and refer them to my friends.

Excellent Rating

(24)

Rating Summary
22
1
1
0
0
22
1
1
0
0
Number of Lexus HS250h services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does the Fuel System Work in a Modern Car?
Cars Cars have evolved a staggering amount over the last decade, and the biggest issue that manufacturers addressed with those advancements involves the amount of fuel used by the engine. Consequently, the fuel systems found in modern cars can get...
How to Get Started on a Hill When Driving a Manual Transmission Car
A A manual transmission (https://www.yourmechanic.com/article/how-a-manual-transmission-works) gives you better control of the speed and power of your vehicle while driving compared with an automatic transmission. For the most part, driving a car with a manual transmission is easy enough. But starting...
5 Essential Things to Know About Your Car’s Anti-Lock Braking System (ABS)
Most Most newer vehicles come equipped with anti-lock braking systems, also known as ABS, in the vehicle. ABS helps to prevent the vehicle from skidding and helps the driver to maintain control when applying the brakes. Here are the 5...

Car won't start strong smell of gas when I try to start it

Odds are, if you smell gas while cranking the engine, it's getting fuel. It's probably not getting spark. Common causes for no spark: Bad crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). Bad camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). Bad engine control module. Shorted/broken wires (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection). The only...

Hi! My name is Tim and I have a 2009 GMC Acadia. Here not Long ago in my vehicle started losing power while accelerating. Ended up

Hello, thank you for writing in. There are several other components, some that you have mentioned, that can cause a multiple cylinder misfire. With that being said, the fuel filter should ALWAYS be replaced when replacing the fuel pump. Start...

Where is the orifice tube on a 99 Isuzu rodeo

Your vehicle uses a thermostatic expansion valve, rather than an orifice tube, to meter refrigerant into the evaporator. This expansion valve is in the plastic case that contains the evaporator coil under the dash. You have to remove the evaporator...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com