Lexus GS350 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(126)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(126)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Lexus GS350 Car Thermostat Replacement is $330 with $134 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$910.38Shop/Dealer Price$1092.55 - $1619.20
2014 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$510.59Shop/Dealer Price$591.63 - $824.65
2017 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$897.77Shop/Dealer Price$1073.71 - $1595.70
2010 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$512.15Shop/Dealer Price$593.64 - $827.87
2015 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$562.81Shop/Dealer Price$660.57 - $935.51
2011 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$512.15Shop/Dealer Price$593.98 - $828.47
2007 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$512.15Shop/Dealer Price$593.68 - $827.94
2009 Lexus GS350V6-3.5LService typeCar Thermostat ReplacementEstimate$512.15Shop/Dealer Price$593.64 - $827.87
Show example Lexus GS350 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(126)

Rating Summary
114
8
1
0
3
114
8
1
0
3

Adrian

11 years of experience
26 reviews
Adrian
11 years of experience
GS350 2010 - Brake Caliper - Atlanta, GA
Adrian was very professional and addressed all the issues I had with my vehicle. Would highly recommend.

Simon

5 years of experience
21 reviews
Simon
5 years of experience
GS350 2013 - Brake System Flush - Jacksonville, FL
Excellent technician. Showed up on time and completed the job.

Simon

5 years of experience
21 reviews
Simon
5 years of experience
GS350 2013 - Serpentine/Drive Belt - Jacksonville, FL
Excellent technician. Showed up on time and completed the job.

Rashad

0 years of experience
28 reviews
Rashad
0 years of experience
GS350 2013 - Brake Pads - Atlanta, GA
Knew exactly what he was doing and didn't take long I will use again

Excellent Rating

(126)

Rating Summary
114
8
1
0
3
114
8
1
0
3
Number of Lexus GS350 services completed
1386+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

P3427 OBD-II Trouble Code: Cylinder 4 Deactivation/Intake Valve Control Circuit Low
What What the P3427 code means When starting, and when the vehicle is operating under heavy weight, the engine will operate in V8 mode. But when driving conditions are light, the engine will deactivate 4 of the 8 cylinders, thereby...
P0328 OBD-II Trouble Code: Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)
P0328 code definition P0328 is a general OBD2 diagnostic trouble code pointing to a fault within the knock sensor 1 circuit. What...
How to Replace a Car Door Panel
You You may have that annoying rattle coming from your door as you drive, your window may no longer work,our door locks or handles may not function properly, or you may even have a problem with the switches on the...

Engine idles in cold temps, sometimes in warm, idles in neutral and engine sometimes shuts of when stopping

You could try cleaning the throttle body and idle control valve. If the engine has a vacuum leak, then fix the leak. An idle of around 900 RPMs is about normal for most manual transmission vehicles and you may have...

Should I have concerns on a check engine light flashing for 2 seconds just after startup and acceleration?

Hi there. What code/codes are stored in the ECM? Weak ignition coil/coils, oil saturated spark plug wires, worn spark plugs, weak/broken ignition coil electrical connectors (very common on the Toyota/Lexus straight 6 cylinder engines), cracked/split intake hose chamber (also common),...

2011 CAMRY LE 2.5 NOISE WHEN GOING STRAIGHT AND GOES AWAY WHEN TURNING RIGHT OR MERELY MOVING STEERING TO RIGHT. SOUNDED LIKE A WH

If wheel bearings are installed without using a calibrated torque wrench to apply the hub axle nut to the exact required torque specification, the bearings are more or less instantly destroyed once you start driving on them. This, indeed, is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com