Lexus ES330 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(231)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(231)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Lexus ES330 Mass Airflow Sensor Replacement is $210 with $115 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Lexus ES330V6-3.3LService typeMass Airflow Sensor ReplacementEstimate$344.51Shop/Dealer Price$419.39 - $604.66
2006 Lexus ES330V6-3.3LService typeMass Airflow Sensor ReplacementEstimate$324.51Shop/Dealer Price$399.42 - $584.71
2004 Lexus ES330V6-3.3LService typeMass Airflow Sensor ReplacementEstimate$324.51Shop/Dealer Price$399.42 - $584.71
Show example Lexus ES330 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(231)

Rating Summary
215
9
0
1
6
215
9
0
1
6

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Lexus ES330 V6-3.3L - Timing Belt - New Caney, Texas
Excellent. Max knows his mechanical stuff and would do business with him again.

Rusty

23 years of experience
514 reviews
Rusty
23 years of experience
Lexus ES330 V6-3.3L - Car is not starting - Arlington, Texas
Rusty was awesome very knowledgeable and honest!

Shaun

30 years of experience
38 reviews
Shaun
30 years of experience
Lexus ES330 V6-3.3L - Brake Light Bulb Replacement (Passenger Side) - Deland, Florida
Friendly, on-time, knowledgeable. Booked in order to change a brake light bulb, he changed both brake lights at no extra charge since he had the extra bulb anyway.

Fabrice

20 years of experience
134 reviews
Fabrice
20 years of experience
Lexus ES330 V6-3.3L - Oil Change - Orlando, Florida
Fabrice was on time and did professional work

Excellent Rating

(231)

Rating Summary
215
9
0
1
6
215
9
0
1
6
Number of Lexus ES330 services completed
2541+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Camshaft Position Sensor Last?
Most Most people get in their car and crank it without ever thinking about what it takes to make this process happen. A variety of different sensors and ignition parts will have to work in conjunction in order for a...
How Long Does an Oil Pressure Sensor Last?
The The lubrication that the oil in your engine offers is important in maintaining the car’s functionality. A variety of parts go into ensuring that the oil supply in a car stays at peak levels. Making sure that the pressure...
The Best Tool to Diagnose Sensor Failures
Mechanics may regularly run into sensor failures when performing a repair service. Automotive oscilloscopes help properly diagnose these issues.

Can a faulty sensor keep the engine from starting?

Today's automobiles use many different sensors to signal engine controls and computer circuits to start a vehicle's engine and run all the programing for fuel, timing, and emissions control. Bearing this in mind, it is critical for the vehicle's main...

Car shifting high when foot on gas pedal

Transmission sensors are usually just to measure vehicle speed and sometimes rpm. I would think that a hydraulic or mechanical  transmission issue would be a more likely cause considering the symptoms. I would first start by checking the transmission fluid...

RPM's are higher than normal on gear changes

Hello. It may be possible that the computer is programmed to delay shifting when the vehicle is cold, in order to help warm up the vehicle faster. Once the vehicle warms up, however, shifting should return to normal. If the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com