Land Rover LR4 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(81)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(81)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Land Rover LR4 Fuel Injector Replacement is $1330 with $938 for parts and $392 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Land Rover LR4V6-3.0L TurboService typeFuel Injector ReplacementEstimate$3333.52Shop/Dealer Price$3861.87 - $5313.68
2011 Land Rover LR4V8-5.0LService typeFuel Injector ReplacementEstimate$3828.47Shop/Dealer Price$4489.32 - $6407.61
2010 Land Rover LR4V8-5.0LService typeFuel Injector ReplacementEstimate$2937.93Shop/Dealer Price$3579.33 - $5483.03
2013 Land Rover LR4V8-5.0LService typeFuel Injector ReplacementEstimate$2937.93Shop/Dealer Price$3579.32 - $5483.02
2012 Land Rover LR4V8-5.0LService typeFuel Injector ReplacementEstimate$2937.93Shop/Dealer Price$3586.54 - $5495.66
Show example Land Rover LR4 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(81)

Rating Summary
71
5
2
1
2
71
5
2
1
2

H

27 years of experience
828 reviews
H
27 years of experience
Land Rover LR4 V8-5.0L - Brake Pads Replacement (Front) - Saratoga, California
Honorio was on time, friendly and expedient. He didn't need any hand holding and was well prepared for the job - even picking up parts on the way that his his team forgot to order in advance. Very conscientious and knowledgable. Highly recommend his services to anyone else looking for a reliable and trustworthy mechanic.

Arturo

28 years of experience
303 reviews
Arturo
28 years of experience
Land Rover LR4 V6-3.0L Turbo - Brake Rotor/Disc Replacement (Front) - Chula Vista, California
Arturo is punctual and gets the job done efficiently. Also is easy going and very personable.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Land Rover LR4 V8-5.0L - Car won't exceed a low speed or shift up - Morristown, New Jersey
Excellent! Skilled, intelligent and courteous. Did the diagnosis and I was 100% confident he had found the problem

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
Land Rover LR4 V6-3.0L Turbo - Pre-purchase Car Inspection - Newport Beach, California
Very good communicator. Felt he was on top of things

Excellent Rating

(81)

Rating Summary
71
5
2
1
2
71
5
2
1
2
Number of Land Rover LR4 services completed
891+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
600+
experts on our platform

Recent articles & questions

P0647 OBD-II Trouble Code: A/C Clutch Relay Control Circuit High
P0647 means that the A/C clutch relay control circuit is malfunctioning due to a faulty control relay, compressor driver, damaged wiring components.
How to Buy a Good Quality Exhaust Gas Recirculation (EGR) Valve
The The exhaust gas recirculation valve (EGR valve) serves to dramatically reduce the emissions that are key contributors to pollution in the air. While EGR systems were not routinely added to engines until 1973, nearly all engines produced or on...
Insurance Requirements for Car Registration in California
Any Any vehicle, operated or parked, in the state of California, must be covered by automotive insurance, or “financial responsibility,” in order to be legally registered in the state. The minimum financial responsibility requirements for private individuals under California law...

What is the break-in period?

Like all other cars on the market, the Ford Fusion requires a break-in period when purchased new. This is a relatively short period during which you need to drive under certain conditions and avoid some types of behavior in order...

How do I adjust the fan speed?

The speed of the cabin fan can be adjusted to your liking. To adjust the fan speed, rotate the Fan Speed Control knob. Turn this knob clockwise to increase the speed of the fan, or turn it counterclockwise to decrease...

I have a cold weather auto start feature in my auto start remote.

Hi there. The cold weather timer is a great feature to have, but you can adjust the time for the auto start to stay on for. I recommend setting the timer for 20 minutes to allow the engine to warm...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com