Land Rover Land Rover Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(164)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(164)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Land Rover Land Rover Brake Pad Replacement is $194 with $99 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Land Rover Land RoverL6-2.6LService typeBrake Pads - Rear ReplacementEstimate$412.47Shop/Dealer Price$504.34 - $740.58
1971 Land Rover Land RoverL6-2.6LService typeBrake Pads - Front ReplacementEstimate$464.01Shop/Dealer Price$572.55 - $850.85
1960 Land Rover Land RoverL4-2.1L DieselService typeBrake Pads - Rear ReplacementEstimate$392.47Shop/Dealer Price$484.37 - $720.63
1961 Land Rover Land RoverL4-2.3L DieselService typeBrake Pads - Rear ReplacementEstimate$392.47Shop/Dealer Price$484.33 - $720.56
1968 Land Rover Land RoverL4-2.3L DieselService typeBrake Pads - Front ReplacementEstimate$445.01Shop/Dealer Price$550.07 - $825.76
1970 Land Rover Land RoverL4-2.3LService typeBrake Pads - Rear ReplacementEstimate$311.79Shop/Dealer Price$382.27 - $546.40
1971 Land Rover Land RoverL4-2.3LService typeBrake Pads - Rear ReplacementEstimate$317.79Shop/Dealer Price$387.99 - $551.90
1963 Land Rover Land RoverL4-2.3LService typeBrake Pads - Front ReplacementEstimate$313.15Shop/Dealer Price$384.39 - $557.71
Show example Land Rover Land Rover Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Land Rover mechanics

Real customer reviews from Land Rover owners like you.

Excellent Rating

(164)

Rating Summary
156
4
3
0
1
156
4
3
0
1

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Brake Pads Replacement (Front, Rear) - Washington, District of Columbia
What a refreshing experience. Richard certainly went the extra mile.

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Land Rover Range Rover Evoque L4-2.0L Turbo - Brake Pads Replacement (Rear) - Chicago, Illinois
Great service and knowledge

Abli

10 years of experience
12 reviews
Abli
10 years of experience
Land Rover Range Rover V6-3.0L Turbo - Brake Pads Replacement (Front, Rear) - Malden, Massachusetts
Expert! Expert! Friendly man with skills. Nice work done

Simon

27 years of experience
283 reviews
Simon
27 years of experience
Land Rover Range Rover V8-4.4L - Brake Pads Replacement (Rear) - Arlington, Virginia
Simon, is trustworthy and honest. Once he changed the battery a few weeks back I felt I could trust him on other things like the brakes today. It was painless and simple and cheaper the taking it to the dealership and I didn't have to leave my house.

Excellent Rating

(164)

Rating Summary
156
4
3
0
1
156
4
3
0
1
Number of Land Rover Brake Pad Replacement services completed
1804+
services done by our mechanics
TOTAL NUMBER OF EXPERT Land Rover MECHANICS
500+
experts on our platform

Recent articles & questions

P0123 OBD-II Trouble Code: Throttle Pedal Position Sensor/Switch (TPS) A Circuit High Input
P0123 code definition Throttle Pedal Position Sensor/Switch (TPS) A Circuit High Input What the P0123 code means P0123 is the generic OBD-II...
What Does the Diesel Engine Pre-Glow Warning Light Mean?
The diesel engine pre-glow light turns on while your engine is warming up. If it flashes, an issue has been detected, such as a worn out glow plug.
How to Find the Source of a Coolant Leak Faster and More Accurately
Keeping a good coolant level in your car is necessary to avoid overheating. If you think there is a leak, find where it's coming from to fix it.

What may cause the starter to engage when shifting the shifter?

Hi there. Check the neutral safety switch and the shifter circuitry. It is possible to have a short in the wiring causing the starter to engage while shifting gears. Look for any wires that may be shorting out with the...

Where is the shop located

HI there - YourMechanic dispatches a mobile professional to your home or office in most major North American cities. This improves your service and repair convenience, and lowers cost of repairs to you. Thanks for thinking of us!

HI! My 2007 PT Cruiser overheated earlier today. The engine was making a knocking sound and shaking. smell of coolant strong.

Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a clogged radiator (https://www.yourmechanic.com/services/radiator-replacement) or a failing coolant fan switch. As you may know the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com