Kia Sephia Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(48)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(48)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a Kia Sephia Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Kia SephiaL4-1.8LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Kia SephiaL4-1.8LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Kia SephiaL4-1.8LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Kia SephiaL4-1.8LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1997 Kia SephiaL4-1.6LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1994 Kia SephiaL4-1.6LService typeParking brake is stuck InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Kia SephiaL4-1.6LService typeParking brake is stuck InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1995 Kia SephiaL4-1.6LService typeParking brake is stuck InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Kia Sephia Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(48)

Rating Summary
45
1
0
0
2
45
1
0
0
2

David

25 years of experience
180 reviews
David
25 years of experience
Kia Sephia L4-1.8L - Parking brake is stuck - Eustis, Florida
David provided excellent service, had my car back to working condition quickly.

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Kia Sephia L4-1.8L - Car Starter Repair - Sacramento, California
Nelson was very professional and he got the starter replaced very quickly.

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Kia Sephia L4-1.8L - Inspection / Diagnostics - Huntington Beach, California
Great knowledge and interface with client.very professional

Eric

15 years of experience
134 reviews
Eric
15 years of experience
Kia Sephia L4-1.8L - Window Motor / Regulator Assembly Replacement (Passenger Side Front) - Hyattsville, Maryland
Eric is an extremely professional and courteous person. He is a great credit to his profession and his company.

Excellent Rating

(48)

Rating Summary
45
1
0
0
2
45
1
0
0
2
Number of Kia Sephia services completed
528+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mini Cooper Clubman
The The 2012 Mini Cooper Clubman is practical and functional for everyday driving. It also offers more passenger and cargo space than the regular Mini Cooper. The Clubman design offers easy access to the cargo space because of the reverse...
How to Install a Car Volt Amp Gauge
When When you think about the number of sensors (https://www.yourmechanic.com/article/what-sensors-do-all-cars-have-and-what-optional-ones-are-there) that your engine has, it seems like there is an endless amount of gauges that can be installed to monitor their readings. Some of these readings are important, but many...
P2266 OBD-II Trouble Code: Low Voltage in Water in Fuel Sensor
P2266 P2266 code definition The P2266 code is set when low voltage is detected in the WIF (Water in Fuel) Sensor circuit at the Engine Control Module (ECM). Other fuel system codes may set along with P2266. What the P2266...

Stalling when stopping reverse

Hello there, a few different faults could cause the stalling when pressing the brakes on your 1998 GMC C2500. The most likely would be a power brake booster (https://www.yourmechanic.com/services/hydraulic-brake-booster-replacement), vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak), EGR (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement), or vacuum line failure (https://www.yourmechanic.com/services/vacuum-hose-s-replacement). Any...

Throttle position sensor - loose connection? 2012 Ford Fusion

Hello - yes, it is possible that the electrical connector for the throttle position sensor (https://www.yourmechanic.com/question/when-i-press-on-gas-pedal-it-s-not-accelerating-by-carl-p) has a loose or poor connection. It is more likely that the throttle position sensor is failing. It has redundant circuitry, which accounts for...

No acceleration when I press the gas

Hi there. Typically when you have acceleration problem as you are describing it can range from fuel, ignition or transmission problems. If the fuel system is clogged with excessive debris or carbon deposits, it will create acceleration problems, as will...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com