Kia Sephia Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Kia Sephia Fuel Injector Replacement is $679 with $539 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1994 Kia SephiaL4-1.6L	Service typeFuel Injector Replacement	Estimate$1448.12	Shop/Dealer Price$1775.00 - $2747.54
1998 Kia SephiaL4-1.8L	Service typeFuel Injector Replacement	Estimate$1621.39	Shop/Dealer Price$1992.07 - $3100.00
1996 Kia SephiaL4-1.6L	Service typeFuel Injector Replacement	Estimate$2138.53	Shop/Dealer Price$2638.52 - $4134.32
1997 Kia SephiaL4-1.8L	Service typeFuel Injector Replacement	Estimate$1699.51	Shop/Dealer Price$2089.75 - $3256.28
1996 Kia SephiaL4-1.8L	Service typeFuel Injector Replacement	Estimate$1224.31	Shop/Dealer Price$1497.22 - $2308.46
1995 Kia SephiaL4-1.6L	Service typeFuel Injector Replacement	Estimate$1439.11	Shop/Dealer Price$1764.39 - $2735.73
1999 Kia SephiaL4-1.8L	Service typeFuel Injector Replacement	Estimate$1621.39	Shop/Dealer Price$1992.11 - $3100.07
2001 Kia SephiaL4-1.8L	Service typeFuel Injector Replacement	Estimate$1621.39	Shop/Dealer Price$1992.10 - $3100.04

Show example Kia Sephia Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(50)

Rating Summary

47

1

0

0

2

47

1

0

0

2

SEE REVIEWS NEAR ME

Edgar

9 years of experience

202 reviews

Edgar

9 years of experience

by Shannon

Kia Sephia L4-1.8L - Power steering fluid is leaking - Austin, Texas

Edgar was great! He was on time, very nice and told me what needed to be replaced and handled. No extra this or that, straight to what needed maintinence. And very friendly. Thank you Egdar! 落

Carlos

13 years of experience

77 reviews

Carlos

13 years of experience

by Jasmine

Kia Sephia L4-1.8L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Baldwin Park, California

Carlos is a great mechanic, who is hard working and knows how to get the job done. He showed up on time every time for every appointment he had with me. My CV axle was stuck in the transmission and with many attempts and tedious hours, he managed to remove and replace my axle. I would request him again for future appointments and would recommend him to family and friends. He's done a great job and I am a satisfied customer!

Carlos

13 years of experience

77 reviews

Carlos

13 years of experience

by Jasmine

Kia Sephia L4-1.8L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Baldwin Park, California

Carlos is a great mechanic, who is hard working and knows how to get the job done. He showed up on time every time for every appointment he had with me. My CV axle was stuck in the transmission and with many attempts and tedious hours, he managed to remove and replace my axle. I would request him again for future appointments and would recommend him to family and friends. He's done a great job and I am a satisfied customer!

Patrick

33 years of experience

369 reviews

Request Patrick

Patrick

33 years of experience

Request Patrick

by DOUG

Kia Sephia L4-1.8L - Cooling/Radiator Fan Motor Replacement - Henderson, Nevada

EXCELLENT TECHNICIAN

Excellent Rating

(50)

Rating Summary

47

1

0

0

2

47

1

0

0

2

SEE REVIEWS NEAR ME

Recent articles & questions

2012 Chevrolet Impala vs. 2012 Toyota Camry: Which One Should I Buy?

In the battle for the family vehicle, the 4-door sedan is a strong contender that just continues to be a viable option even with the rise of the crossover SUV and the popularity of passenger vans. These sedans offer a...

Rules of the Road For Washington Drivers

Driving Driving in the state of Washington gives you a lot of great opportunities to see some of the country’s most beautiful natural sights. If you live in Washington or visiting and plan on doing any driving there, you should...

How to Get the Highest Resale Value for Your Car

When When it’s time to turn in the old reliable runner you’ve driven for years in exchange for a nice, shiny new car, you’re going to want to get the best possible return on your investment. However, this return can’t...

My sunroof doesn't work at all and my ac is blowing hot air

The sunroof and the air conditioning system are two separate systems and are not connected to the same fuse. While a blown fuse for either system is possible, any number of faults can be causing each system to stop working....

Turns over won't start. 2000 Chevy Metro

Hello. Sometimes there are torque specs that are required for tightening the rod bearings. If they are too tight or too loose, it could prevent the car from starting. I would check a Chilton Manual for the proper specs for...

New plugs and new battery but it won't turn over

Hi Diamond. Thanks for contacting us today - and our first for 2018! If you turn the key of your Mazda and the starter will not engage, but you have power to accessories like lights, radio and such, then the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com