Kia Borrego Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Kia Borrego Power Steering Pump Replacement is $509 with $327 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Kia BorregoV8-4.6LService typePower Steering Pump ReplacementEstimate$1018.56Shop/Dealer Price$1227.51 - $1843.81
2010 Kia BorregoV6-3.8LService typePower Steering Pump ReplacementEstimate$843.65Shop/Dealer Price$1009.50 - $1501.68
2009 Kia BorregoV8-4.6LService typePower Steering Pump ReplacementEstimate$854.07Shop/Dealer Price$1022.55 - $1522.58
2011 Kia BorregoV6-3.8LService typePower Steering Pump ReplacementEstimate$843.65Shop/Dealer Price$1009.53 - $1501.73
2009 Kia BorregoV6-3.8LService typePower Steering Pump ReplacementEstimate$866.67Shop/Dealer Price$1040.22 - $1551.13
2010 Kia BorregoV8-4.6LService typePower Steering Pump ReplacementEstimate$1006.85Shop/Dealer Price$1213.71 - $1828.45
Show example Kia Borrego Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Nathan

22 years of experience
298 reviews
Nathan
22 years of experience
Kia Borrego V6-3.8L - 142,500 Miles Maintenance Service - Austin, Texas
Punctual. Friendly. Thorough.

Joseph

18 years of experience
107 reviews
Joseph
18 years of experience
Kia Borrego V6-3.8L - Alternator - Summerville, South Carolina
Outstanding service. Went above and beyond. Very knowledgeable.

David

43 years of experience
220 reviews
David
43 years of experience
Kia Borrego V6-3.8L - Door Lock Actuator Replacement (Passenger Side Front) - Atlanta, Georgia
It was rainy day. My car was outside. In difficult situation he performed job very well I am very satisfied. JWK Kim

Berchel

19 years of experience
101 reviews
Berchel
19 years of experience
Kia Borrego V6-3.8L - Brake Caliper Replacement (Driver Side Front) - Edgewood, Maryland
Very professional and knowledgeable

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Kia Borrego services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Choose an Inexpensive Sports Car
It It happens to everyone. You’re cruising down the highway, minding your own business, when suddenly a sports car zips past you. For a moment, you think about what it would be like to ditch the weekend soccer-mobile, and trade...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Colorado
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Colorado through the Department of Public Health.
A Buyer’s Guide to the 2012 Chevrolet Tahoe
The The Chevy Tahoe has always been one of the most popular SUVs on the market, and this trend continued in 2012. As always, the vehicle proved to be reliable and powerful, with plenty of space and features that people...

Overheating after thermostat replacement

Hello. You could be having a problem with your radiator being clogged up. This will cause the flow of the coolant in the system to be restricted, causing the truck to overheat. A clog in the heater core could also...

I have a 1999 Honda Accord 4 door 180,000 miles no under the hood problems (transmission and engine) just had emissions and other

Hi there. It is very possible that your ignition lock cylinder is damaged; especially if the key gets stuck and the gear is hard to shift. Most ignition systems have a built-in safety device that does not allow the car...

I have been having with my Jeep not starting. A friend tried to jump start it but nothing would happen. The dome light worked however the horn did not. Tried a different vehicle and jumper cables and the Jeep cranked. Ran fine the rest of the day and the next day. This morning my Jeep started fine. I drove to the gas station, came back out and it would not start. Had the same issues trying to jump start it. Napa Auto Parts walked over and tested the battery which read 12.6 volts, the Napa guy was able to start my Jeep with a jumper box. He said the alternator was good too. When leaving to drive my Jeep home, several lights in the dash were flashing, the radio would not work and the speedometer would not work. Got home and let the my Jeep run idle for 20 minutes, then it just died. The Jeep set for several hours while I was at work. I got home and tested the battery with a multimeter and it read 12.6 volts. Tried starting it and it would not do anything. Four hours later, I wanted to go outside to see if my headlights were working turned them on and they were. I thought let me try and start it. The Jeep started right up with no issue. Could this be a bad battery even though it is showing 12.6 volts, the Napa guy did say the CCA were low but the battery was good. Would a faulty crankshaft cause issue that would mimic a bad battery, alternator or starter? I'm at a loss and don't want to waste money buying a battery if it is something else.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com