Jeep Scrambler Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Jeep Scrambler Fuel Injector Replacement is $654 with $502 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1982 Jeep ScramblerL6-4.2LService typeFuel Injector ReplacementEstimate$3569.88Shop/Dealer Price$4432.36 - $6983.79
1984 Jeep ScramblerL4-2.5LService typeFuel Injector ReplacementEstimate$1196.74Shop/Dealer Price$1473.96 - $2269.56
1983 Jeep ScramblerL6-4.2LService typeFuel Injector ReplacementEstimate$3537.88Shop/Dealer Price$4400.39 - $6951.83
1985 Jeep ScramblerL6-4.2LService typeFuel Injector ReplacementEstimate$3538.84Shop/Dealer Price$4401.55 - $6953.69
1984 Jeep ScramblerL6-4.2LService typeFuel Injector ReplacementEstimate$3537.88Shop/Dealer Price$4400.41 - $6951.88
1985 Jeep ScramblerL4-2.5LService typeFuel Injector ReplacementEstimate$1155.42Shop/Dealer Price$1422.31 - $2186.91
1982 Jeep ScramblerL4-2.5LService typeFuel Injector ReplacementEstimate$1204.74Shop/Dealer Price$1481.74 - $2277.17
1981 Jeep ScramblerL4-2.5LService typeFuel Injector ReplacementEstimate$1204.74Shop/Dealer Price$1482.34 - $2278.22
Show example Jeep Scrambler Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Joseph

20 years of experience
640 reviews
Joseph
20 years of experience
Jeep Scrambler L6-4.2L - Car is not starting - South Jordan, Utah
Arrived on time but was unable to diagnose because I had an older vehicle. He was able to suggest possible fixes and put me in contact with my aftermarket fuel injection kit providers for possible help. Was extremely knowledgeable and upfront. Would recommend for newer vehicles.

Cesar

9 years of experience
292 reviews
Cesar
9 years of experience
Jeep Scrambler L4-2.5L - Ignition Switch - Edmonds, Washington
Great job!

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Jeep Scrambler L6-4.2L - Pre-purchase Car Inspection - Marietta, Georgia
Great

Jacob

12 years of experience
329 reviews
Jacob
12 years of experience
Jeep Scrambler L6-4.2L - Transfer Case Output Shaft Seal Replacement (Front) - Dallas, Texas
Jacob did a great job and was very thorough. Great attention to detail and left my garage cleaner than he found it. I've already booked another service with him.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Jeep Scrambler services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Coolant Vacuum Valve Switch Last?
The The coolant vacuum valve switch opens when the heater is turned on, and allows coolant from the engine to enter the heater core. This warm air coming off of the engine is what provides you with heat to the...
How Long Does an Ignition Switch Last?
Most Most car owners fail to realize just how much work getting a car started is. In order for this process to work the right way, a variety of different parts on the car will have to work in unison....
How to Renew Your Car Registration in Texas
There There are a number of things that a person will have to do when trying to move to Texas. In order to make sure that your car is safe and legal to drive, you will need to take the...

How do I correctly position the floor mats?

Your car’s floor mats serve an important purpose – they help preserve the carpet and floorboards. However, they need to be correctly positioned to ensure that they don’t become dangers while driving. Here’s what you need to know: Make sure...

How do I cancel cruise control?

There are three easy ways to cancel the cruise control: 1. Press the CRUISE button, which is located on the steering wheel. 2. Press the CANCEL button, which is located on the steering wheel. 3. Press the brake pedal. When...

hello, i was just informed that my actuator for my heat/air needs to be replaced. I see from other internet sites that people with

The manufacturer will not have a recall on anything that does not pose a safety hazard to the vehicle or persons when operating the vehicle. You will need to contact your warranty company directly to get them to look at...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com