Jeep Renegade Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(51)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(51)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Jeep Renegade Brake Master Cylinder Replacement is $422 with $299 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Jeep RenegadeL4-1.4L TurboService typeBrake Master Cylinder ReplacementEstimate$746.73Shop/Dealer Price$909.04 - $1366.72
2018 Jeep RenegadeL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$720.73Shop/Dealer Price$883.06 - $1340.76
2016 Jeep RenegadeL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$768.22Shop/Dealer Price$935.56 - $1397.02
Show example Jeep Renegade Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(51)

Rating Summary
50
0
1
0
0
50
0
1
0
0

Alex

20 years of experience
137 reviews
Alex
20 years of experience
Jeep Renegade L4-2.4L - Car is not starting - Plainfield, Illinois
Alex was prompt, courteous, and took the time to explain everything in non-mechanic terms. I was very pleased with my experience and will absolutely recommend your company!!

Paul

23 years of experience
292 reviews
Paul
23 years of experience
Jeep Renegade L4-2.4L - Battery - Charlotte, North Carolina
Paul arrived on time and was very efficient and friendly. Quick service. Did the job without complaint even in the extreme heat.

Carlos

17 years of experience
225 reviews
Carlos
17 years of experience
Jeep Renegade L4-2.4L - Pre-purchase Car Inspection - Glendale, California
Carlos was great. He arrived on time and did a thorough job.

Raymond

27 years of experience
223 reviews
Raymond
27 years of experience
Jeep Renegade L4-2.4L - Oil Change - Apple Valley, California
Good

Excellent Rating

(51)

Rating Summary
50
0
1
0
0
50
0
1
0
0
Number of Jeep Renegade services completed
561+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P0017 OBD-II Trouble Code: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
P0017 P0017 code definition Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B) What the P0017 code means P0017 is the OBD-II generic code indicating that the crankshaft and camshaft position sensor for bank 1 exhaust camshaft do not...
How to Troubleshoot a Slipping Clutch
There are numerous advantages to operating a vehicle with a manual transmission; many drivers claim it gives them more control over...
10 Best Stores to Buy Auto Parts in Richmond, Virginia
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Richmond is Advance Auto Parts

Car failed emissions test

Hi, to fix this problem you will need to replace the intake manifold gaskets. That will take care of the Barometric Pressure Sensor. I would inspect the exhaust gas recirculation (EGR) valve, since it may have been left open causing...

Ball joint fell off

I would ask one of the mechanics at YourMechanic to come to you and replace the broken ball joint so your vehicle will be drivable again. When you book your appointment, be sure to indicate whether it is the front...

Can I use back door handle for the front door handle inside and out, if so how?

I would recommend against doing this. Most vehicle door handles are not compatable from front to back. If you have a junk yard near your location, you can usually get parts such as door handles very inexpensively. I would recommend...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com