Jeep Patriot Serpentine/Drive Belt Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Serpentine/Drive Belt Replacement Service

How much does a Serpentine/Drive Belt Replacement cost?

On average, the cost for a Jeep Patriot Serpentine/Drive Belt Replacement is $182 with $42 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Jeep PatriotL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$254.00Shop/Dealer Price$282.35 - $359.30
2013 Jeep PatriotL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.57 - $347.20
2011 Jeep PatriotL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.60 - $347.24
2014 Jeep PatriotL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.60 - $347.24
2012 Jeep PatriotL4-2.4LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$273.07 - $349.82
2017 Jeep PatriotL4-2.4LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.74 - $347.49
2007 Jeep PatriotL4-2.0LService typeSerpentine/Drive Belt ReplacementEstimate$229.41Shop/Dealer Price$252.14 - $316.11
2015 Jeep PatriotL4-2.4LService typeSerpentine/Drive Belt ReplacementEstimate$244.99Shop/Dealer Price$271.60 - $347.24
Show example Jeep Patriot Serpentine/Drive Belt Replacement prices

What is a serpentine belt and how does it work?

A serpentine belt is a relatively long, flat, multi-ribbed belt that is driven by the engine’s crankshaft pulley. The belt drives many, and often all, of the engine accessories such as the alternator, air conditioning compressor, power steering pump, water pump, and air pump. The serpentine belt is tensioned by a hydraulic or spring-loaded automatic tensioner. Some older cars use a serpentine belt to drive most accessories but will also have a shorter v-style belt to drive, for example, the power steering pump.

Belts

When to consider replacing the serpentine belt:

  • Regularly scheduled maintenance. Typically, belt manufacturers recommend belt replacement at 90,000 miles. However, the belt must be inspected for wear or damage at regular intervals prior to this high mileage.
  • Squealing noise, belt slippage, visible belt damage. Should the belt fail or wear out prematurely, you may hear noise or you may see visible signs of deterioration such as missing chunks of rubber, excessive cracking, or a shredded appearance on the edge of the belt.
  • Battery Light. A loose belt, perhaps caused by a defective tensioner, may not drive the alternator at adequate speed and thus the battery may discharge, causing the warning light to illuminate.
  • Engine overheating. Often, the serpentine belt drives the water pump. In those applications, if the belt breaks the engine will overheat in seconds to minutes. If the belt is inadequately tensioned, you may notice higher-than-normal engine operating temperature.

How do mechanics replace the serpentine belt?

  • Prior to removing the belt, the mechanic must run the engine to determine if the idler pulley and the belt tensioner are noise-free. Those rotating components have grease filled bearings and are subject to wear. In addition, the mechanic will ensure that all pulleys and accessories are turning in the same plane. These steps help make sure your new belt will operate trouble-free for its full-service life.
  • The belt’s routing path through the various components is noted. The belt tensioner is released, usually with a wrench or lever, to release the tension from the belt. With the tension off, the belt slides off the pulleys.
  • All rotating components — that is the alternator, air conditioner compressor, etc. — are checked for smooth operation and no noise.
  • If everything checks out, the new belt is slipped over all of the pulleys while holding the tensioner away from the belt. Once the belt is centered on all pulleys, the tensioner is released and the installation is complete. The engine is run to ensure normal operation.

Is it safe to drive with a serpentine belt problem?

No. Should the belt have visible damage, you risk unexpected and sudden breakage that could potentially leave you stranded. Serpentine belt problems that result in the alternator not charging may cause the battery to discharge, which will result in loss of electrical power to the vehicle. Additionally, if a deteriorated belt breaks and that belt drives the water pump, the engine will overheat in a matter of seconds.

When replacing the serpentine belt keep in mind:

  • On many cars, the expected service life of a serpentine belt is around 90,000 miles. Should the belt fail well prior to that, a very careful inspection should be performed to check for out-of-alignment pulleys, a possibly out-of-position crankshaft harmonic balancer on which the drive pulley is mounted, binding pulleys, or a defective belt tensioner.
  • Attention should always be given to serpentine belt routing, since proper routing is critical to proper belt tension, and function of the driven components.
  • Sometimes it is difficult to distinguish serpentine belt related noise from other engine noises. In these cases, a mechanic will determine the origin of the noise by momentarily running the engine without the serpentine belt attached.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Jeep Patriot Serpentine/Drive Belt Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P2128 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch "E" Circuit High Input
P2128 P2128 trouble code definition The pedal position sensor is used as an input to the engine control module (ECM) to determine the amount of torque requested by the operator. The ECM should receive an input that is within the...
How to Turn Off the Reverse Beep in a Prius
The The Toyota Prius is designed to shut off the engine when stopped as an energy-conserving measure. When the accelerator is depressed, it starts to back up, so you can go about your business on the road. When your Prius...
How to Replace a Tailgate Lock Solenoid
The tailgate lock solenoid controls the locking mechanism on your trunk or tailgate and needs to be replaced if your tailgate doesn't unlock.

How do I know if my water pump has went out?

Hello, a coolant pump can fail three different ways: leaking, noise, or low to no flow of coolant. Leaking (https://www.yourmechanic.com/services/coolant-is-leaking-inspection) would be associated with a loss of coolant and needing to add coolant (https://www.yourmechanic.com/services/top-off-coolant) back into the system. This could...

Coolant temperature gauge does not move at all. 1998 Ford Ranger

Hi there - most likely the coolant temperature sensor (https://www.yourmechanic.com/article/how-to-replace-a-cylinder-head-coolant-temperature-sensor-by-steve-kaleff) (for the gauge, not the coolant sensor that drives the fuel injection - there are usually two) is toast. This can be checked with an ohm meter. A reading of...

I have a 07 Saturn ion 2 and my car it won't move all gears work but it just want take off I need help please

Hello, thank you for writing in. The first assumption we make when the vehicle does not move while in gear, is that the transmission fluid is low. Start by checking the level and the condition of the fluid. If it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com