Jeep Jeepster Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Jeepster Control Arm Assembly Replacement is $201 with $106 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1969 Jeep JeepsterL4-2.2LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$575.63Shop/Dealer Price$700.79 - $1053.77
1966 Jeep JeepsterV6-3.7LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$336.83Shop/Dealer Price$407.31 - $596.20
1967 Jeep JeepsterL4-2.2LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$675.81Shop/Dealer Price$825.54 - $1243.17
1970 Jeep JeepsterV6-3.7LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$541.31Shop/Dealer Price$662.89 - $1005.12
1968 Jeep JeepsterV6-3.7LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$486.07Shop/Dealer Price$588.38 - $863.73
1967 Jeep JeepsterV6-3.7LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$486.07Shop/Dealer Price$588.36 - $863.69
1968 Jeep JeepsterL4-2.2LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$311.11Shop/Dealer Price$373.77 - $539.52
1966 Jeep JeepsterL4-2.2LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$311.11Shop/Dealer Price$374.14 - $540.18
Show example Jeep Jeepster Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(33)

Rating Summary
30
2
0
0
1
30
2
0
0
1

Luis

15 years of experience
175 reviews
Luis
15 years of experience
Jeep Jeepster V6-3.7L - Car is not starting - Las Vegas, Nevada
We had a great experience. Thanks Luis!

Lemard

21 years of experience
26 reviews
Lemard
21 years of experience
Jeep Liberty V6-3.7L - Control Arm Assembly Replacement (Front Upper Left) - Fultondale, Alabama
Excellent service! Very kind and polite. Fast service. Very happy!

Stacy

24 years of experience
366 reviews
Stacy
24 years of experience
Jeep Liberty V6-3.7L - Control Arm Assembly Replacement (Front Upper Left) - Morrow, Georgia
Great service! Great Mechanic

Cognac

20 years of experience
73 reviews
Cognac
20 years of experience
Jeep Wrangler L6-4.0L - Control Arm Assembly Replacement (Front Upper Left, Front Lower Left, Front Lower Right) - Memphis, Tennessee
He knows his cars but not his jeeps.

Excellent Rating

(33)

Rating Summary
30
2
0
0
1
30
2
0
0
1
Number of Jeep Control Arm Assembly Replacement services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Impala
A A true classic, the 2012 Chevrolet Impala may not have all of the latest high-tech features of other sedans on the market, but it is a tried-and-true model with lots of room, plenty of comfortable features, and a large...
How to Buy a Good Quality Stereo
The The term “car stereo” actually refers to the receiver – also known as the head unit or the deck – the receiver is the central processor for your vehicle audio system. Once you’ve chosen the receiver, you need to...
10 Tips to Help You Pass Your Driving Test
Taking Taking the practical driving test is a rite of passage that all driver’s must experience. Since you can’t know everything that might happen once you climb behind the wheel with an examiner beside you, driving tests aren’t known for...

Car was weak starting and would barely go once I tried to drive it.

It sounds like your battery or your alternator is getting weak. When the vehicle starts slowly and seems to have trouble, this is usually related to a dying or dead battery. The alternators job is to charge the battery while...

im having trouble looking for a replacement Trans for my Chevy Impala 2006 police pack 3.9l any other transmission i can use?

Hi Johnatan. Thanks for contacting us today. It's recommended to replace any OEM transmission with the same type of system from the same year, make and model of vehicle. You might find luck with a local transmission shop or ask...

I have a code 17748 camshaft pos. /crank shaft pos. Sensor incorrect allocation what does this mean

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com