Jeep J-4700 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Jeep J-4700 Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1973 Jeep J-4700L6-4.2LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1971 Jeep J-4700V8-5.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1972 Jeep J-4700V8-5.0LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1970 Jeep J-4700L6-3.8LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1972 Jeep J-4700L6-4.2LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1973 Jeep J-4700V8-5.9LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1970 Jeep J-4700V8-5.7LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1971 Jeep J-4700V8-5.9LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Jeep J-4700 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(298)

Rating Summary
290
5
1
0
2
290
5
1
0
2

Roberto

12 years of experience
304 reviews
Roberto
12 years of experience
Jeep Renegade L4-2.4L - Battery - Houston, Texas
Excellent

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Jeep Wrangler L6-4.0L - Battery - Los Angeles, California
Ricardo was incredibly helpful and was able to identify the issue the second he looked at the car! Very friendly and extremely qualified.

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Jeep Compass L4-2.4L - Battery - Metuchen, New Jersey
Excellent service

Chris

16 years of experience
324 reviews
Chris
16 years of experience
Jeep Patriot L4-2.0L - Battery - San Diego, California
very easy to coordinate with

Excellent Rating

(298)

Rating Summary
290
5
1
0
2
290
5
1
0
2
Number of Jeep Car Battery Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Understanding the Different Types of Oil Filters
The The motor oil that you put into your engine, along with its additives, works to absorb and hold organic and inorganic contaminants. Organic contaminants can include bacteria, bugs, and oxidized oil. Inorganic impurities can include metallic particles, wearing off...
P0177 OBD-II Trouble Code: Fuel Composition Sensor Circuit Range/Performance
P0177 P0177 code definition Fuel Composition Sensor Circuit Range/Performance What the P0177 code means P0177 is a generic OBD-II code indicating that the diesel fuel sensor has detected water in the fuel filter, or the fuel composition sensor is out...
Veteran and Military Driver Laws and Benefits in Illinois
The The state of Illinois offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Reduced fee license plate While Illinois does...

When should I wash and what procedures should I follow?

Keeping your car’s exterior in good shape is important for a number of reasons. Of course, it helps it stay looking great, but it also helps protect the clearcoat and paint against damage. Here’s what you need to know about...

Does tire size affect the vehicle stability assist system?

Honda designed your Accord to use a specific tire size (or range of tire sizes). The vehicle stability assist (VSA) system is also designed to work with this specific size. That means if you install tires that are a different...

Code P0455 2004 Audi A4 2.0T

Hello - a P0455 (https://www.yourmechanic.com/article/p0455-obd-ii-trouble-code-system-gross-leak-evaporative-emission-by-john-nelson) indicates a large evaporative emissions leak. This problem code originates with the evaporative emissions system purge valve, which expects positive pressure flow from the evap emissions cannister - which captures fumes from the fuel tank...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com