Jeep J-3600 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(448)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(448)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Jeep J-3600 Brake Pad Replacement is $178 with $83 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1970 Jeep J-3600V8-5.3LService typeBrake Pads - Rear ReplacementEstimate$280.31Shop/Dealer Price$331.64 - $463.13
1970 Jeep J-3600V8-5.7LService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1969 Jeep J-3600V8-5.7LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1968 Jeep J-3600L6-3.8LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.64 - $443.12
1967 Jeep J-3600V8-5.3LService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.67 - $443.19
1969 Jeep J-3600V8-5.3LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1966 Jeep J-3600L6-3.8LService typeBrake Pads - Front ReplacementEstimate$265.31Shop/Dealer Price$316.52 - $447.92
1965 Jeep J-3600L6-3.8LService typeBrake Pads - Front ReplacementEstimate$265.31Shop/Dealer Price$316.89 - $448.58
Show example Jeep J-3600 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(448)

Rating Summary
434
11
1
0
2
434
11
1
0
2

Rigoberto

11 years of experience
739 reviews
Rigoberto
11 years of experience
Jeep Liberty V6-3.7L - Brake Pads Replacement (Front) - Chicago, Illinois
Rigobertos was able to show up for my appointment 5 hours earlier which was more convenient. He repaired my brakes expertly and he diagnosed which repairs still are needed for my car.

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Jeep Grand Cherokee V8-5.7L - Brake Pads Replacement (Rear) - Portland, Oregon
Quick and Concise Service. Great diagnosis of my car as well.

Braxton

11 years of experience
205 reviews
Braxton
11 years of experience
Jeep Grand Cherokee L6-4.0L - Brake Pads Replacement (Front, Rear) - Orlando, Florida
Braxton was on time, courteous, and finished the job quickly. Definitely happy with the service he provided.

Kelly

34 years of experience
173 reviews
Kelly
34 years of experience
Jeep Liberty V6-3.7L - Brake Pads Replacement (Front) - Charlotte, North Carolina
Kelly did a great job! I loved the tracking app because I knew when to meet him at the car. Since he was an experienced mechanic, he was able to diagnose and showed me an additional problem before he got started. Although he had to get an extra part, he still completed the job in the allotted two hours. He did an outstanding job. I was very pleased with this experience. Kelly is an excellent mechanic, and I will use him again and again.

Excellent Rating

(448)

Rating Summary
434
11
1
0
2
434
11
1
0
2
Number of Jeep Brake Pad Replacement services completed
4928+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Take Off Window Tint
Window tint needs to be removed before it loses efficiency as a UV protectant and privacy screen. Read these 5 methods for removing it yourself.
Symptoms of a Bad or Failing Brake Master Cylinder
Common signs of a faulty brake master cylinder include abnormal brake pedal behavior, contaminated brake fluid, and the Check Engine Light turning on.
How to Replace a Differential Output Seal
Differential output seals prevent fluid from leaking out of the differential, causing the differential to overheat and cause damage to your car.

Car key won't turn on the first time

If I were to take a guess, without any other information, I would say that fuel pressure is dropping off to zero when the car is parked. The fuel pump has a check valve to maintain some pressure for quick...

Code p0140 we replaced 02 sensor and catalatyic converter

The vehicle should have an original equipment HO2S not aftermarket generic. For a P0140 code (https://www.yourmechanic.com/article/p0140-obd-ii-trouble-code-o2-sensor-circuit-no-activity-detected-bank-1-sensor-2-by-jay-safford), the wiring harness should be closely inspected for damage: chafing, pinches, melting, or water intrusion into connector. Exhaust leaks upstream of the HO2S must...

I have a new 2015 Subaru Crosstrek and haven't had an oil change yet. No alerts have come on yet

Subaru does not recommend leaving the engine oil in longer than 6 months (or 6,000 miles, whichever comes first). So you are definitely overdue on an oil change (https://www.yourmechanic.com/services/change-oil-and-filter) based on the time criteria. Subaru recommends 100% synthetic oil. Although...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com