Jeep J-320 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Jeep J-320 Wheel Bearings Replacement is $283 with $188 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1965 Jeep J-320L6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$509.23Shop/Dealer Price$617.79 - $920.97
1964 Jeep J-320L6-3.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$518.13Shop/Dealer Price$627.06 - $920.07
1965 Jeep J-320V8-5.3LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$489.23Shop/Dealer Price$597.81 - $901.00
1964 Jeep J-320L6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$489.23Shop/Dealer Price$597.79 - $900.96
1964 Jeep J-320L6-3.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$518.13Shop/Dealer Price$627.09 - $920.10
1964 Jeep J-320L6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$489.23Shop/Dealer Price$597.81 - $901.00
1965 Jeep J-320V8-5.3LService typeWheel Bearings - Driver Side Front ReplacementEstimate$525.63Shop/Dealer Price$634.36 - $927.20
1963 Jeep J-320L6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$494.23Shop/Dealer Price$603.04 - $906.42
Show example Jeep J-320 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(41)

Rating Summary
37
2
0
0
2
37
2
0
0
2

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Jeep Patriot L4-2.4L - Wheel Bearings Replacement (Driver Side Front) - Jacksonville, Florida
Brian was great, he got my car up and running in no time and explained everything to me.

Taylor

8 years of experience
47 reviews
Taylor
8 years of experience
Jeep Grand Cherokee V8-4.7L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Dallas, Georgia
did a fine job on my wheel bearings. he is a good mechanic

Josh

16 years of experience
78 reviews
Josh
16 years of experience
Jeep Patriot L4-2.4L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Naples, Florida
Did a great job replacing my front bearings. Would definitely book Josh again.

Jerome

24 years of experience
415 reviews
Jerome
24 years of experience
Jeep Grand Cherokee L6-4.0L - Wheel Bearings Replacement (Passenger Side Rear) - Baltimore, Maryland
Mechanic was prompt,courteous and very helpful.

Excellent Rating

(41)

Rating Summary
37
2
0
0
2
37
2
0
0
2
Number of Jeep Wheel Bearings Replacement services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

The Top 5 Selling Cars in Delaware in 2012
Delaware Delaware offers a variety of weather, which means drivers have to be prepared for both the mild and the treacherous. In previous years, the best-selling vehicles have included the Honda Civic, Accord and CR-V, along with the Toyota Camry....
P2190 OBD-II Trouble Code: System Too Rich at Idle Bank 2
P2190 P2190 code definition System Too Rich at Idle Bank 2 What the P2190 code means This code indicates there is too much fuel in relation to air (air/fuel ratio) in bank 1 at idle only. Bank 1 is the...
Veteran and Military Driver Laws and Benefits in Delaware
The The state of Delaware offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Vehicle registration benefits Delaware waives registration and...

How does the antilock brake system work?

The anti-lock brake system (ABS) on your car is designed to help ensure that you’re able to maintain control of the steering when you slam on your brakes. It’s a hydraulic system and supplemental to your main brake system. The...

Air not working

Hello. There are many components involved in the air conditioning system, and many possible points of failure. If no air is coming from the vent, you can consider the interior fan and its circuits. Cool or warm air when the...

Fluid in the boot looks like power steering fluid

Hello. The fluid in the boot is a separate issue. If there is fluid in the boot it is because the rack and pinion is failing. These boots are not there to contain fluid but to keep dirt out. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com