Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.
How A Diagnostic Works
Instantly book a certified mobile mechanic to come to you
Mechanic diagnoses the problem and quotes necessary repairs
Your vehicle is ready to go
Fair, upfront & transparent pricing for all services
Our certified mobile mechanics can come to you now.
On average, the cost for a Jeep Grand Wagoneer Loud squealing or squeaking is coming from timing belt Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.
In order for your engine to operate, it requires several belts. The most important of these is your timing belt – it’s responsible for synchronizing the crank and camshaft rotation to ensure that valves open and close correctly. Like all belts on your car, the timing belt is subject to wear and tear, and all automakers have a rigid replacement recommendation (generally somewhere between 50,000 and 80,000 miles, but it does vary considerably from one company to another, and even model to model).
The timing belt is a toothed belt that keeps your engine synchronized (in time). It ensures that the camshaft and crankshaft are in synch during operation, and that the valves open and close at the right times in relation to piston movement. As such, it is perhaps the single most important maintenance item on your car and should be replaced at the manufacturer’s recommended service interval.
To sum this up in a nutshell, the piston and valves in your engine essentially take up the same space. Obviously, they can’t do this at the same time, or they’d crash into each other and cause serious damage. The timing belt ensures that their movement is timed correctly. When the belt breaks, timing is thrown off. The most common outcome here is bent valves (due to impact with the piston), but it can also cause damage to the cylinder head, or even to the camshaft itself.
Note that some automakers have switched to using timing chains rather than timing belts. Metal chains offer much better lifespans, and should last for the life of the engine in most cases. It should also be noted that timing belts do not squeak. The belt is toothed, so it doesn’t slip like a serpentine or V-belt. Any squeaking noise from around the timing belt cover must come from something else.
Failing Water Pump Pulley: The most common cause of squealing or squeaking from the timing belt cover is the water pump pulley. If the bearings in the pulley are beginning to fail, they will make noise. Eventually, they’ll seize and the water pump will no longer operate, causing your engine to overheat.
Serpentine or V-Belt Slipping: Another common cause here is noise transference from a slipping serpentine or V-belt. In these instances, the sound is actually coming from the belt slipping on a pulley and it just SOUNDS like it’s coming from behind the timing belt cover.
Belt Too Tight: Again, the sound cannot be coming from your timing belt, but if you’ve recently had your serpentine belt or V-belt replaced, it could be adjusted too tight, which will cause squeaking or squealing.
Pulley Misalignment: A squealing or squeaking noise can seem to come from behind the timing belt cover if one of your other pulleys is misaligned (generally after incorrect replacement of the belt on an adjustable pulley).
A top-rated mobile mechanic will come to your home or office to inspect the entire engine and listen to the squealing or squeaking noise. Depending on when the noise occurs, this may require a test drive. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.
The mechanic will need to inspect the engine while it’s operating in order to determine the source of the noise and whether it is coming from a belt or a pulley. The mechanic will also visually inspect the belt and all pulleys to determine wear and condition, and then make a recommendation on the next step for repair.
If you’re hearing a squealing or squeaking sound from behind the timing belt cover, chances are good that it’s the water pump pulley. If this pulley fails, your engine will overheat, causing potentially devastating damage (up to and including a cracked block). The best defense here is to ensure that the water pump is changed when the timing belt is changed, and to always follow the automaker’s service recommendations. One of our professional mechanics can listen to and inspect your engine, diagnose the problem and then repair it.
Fast and easy service at your home or office
Backed by 12-month, 12.000-mile guarantee
Real customer reviews from Jeep owners like you.