Jeep Grand Wagoneer Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Jeep Grand Wagoneer Headlight Bulb Replacement is $109 with $14 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Jeep Grand WagoneerV8-5.2LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$142.97Shop/Dealer Price$159.97 - $188.45
1989 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$137.39Shop/Dealer Price$158.01 - $197.32
1987 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$137.39Shop/Dealer Price$158.01 - $197.32
1986 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$137.39Shop/Dealer Price$157.99 - $197.28
1984 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$137.39Shop/Dealer Price$158.02 - $197.35
1988 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$137.39Shop/Dealer Price$158.01 - $197.32
1985 Jeep Grand WagoneerL6-4.2LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$148.65Shop/Dealer Price$170.70 - $214.60
1990 Jeep Grand WagoneerV8-5.9LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$142.39Shop/Dealer Price$163.24 - $202.74
Show example Jeep Grand Wagoneer Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(20)

Rating Summary
16
3
0
0
1
16
3
0
0
1

Chad

16 years of experience
76 reviews
Chad
16 years of experience
Jeep Grand Wagoneer V8-5.9L - Differential Output Seal - Richmond, Virginia
Chad is the best. Knowledgable and reliable.

Pierre

9 years of experience
308 reviews
Pierre
9 years of experience
Jeep Grand Wagoneer L6-4.2L - Oil Change - Cambridge, Massachusetts
Pierre is literally amazing. Will request from now on!

Hugh

11 years of experience
106 reviews
Hugh
11 years of experience
Jeep Grand Wagoneer V8-5.2L - Tune-up - Parker, Colorado
Hugh was very professional and a pleasure to work with

Kyle

9 years of experience
2 reviews
Kyle
9 years of experience
Jeep Grand Wagoneer V8-5.9L - Starter - Fort Lauderdale, Florida
Kyle showed up on time. He was prepared with all parts and tools he need. He was very courteous and explained everything that he was doing and what parts failed

Excellent Rating

(20)

Rating Summary
16
3
0
0
1
16
3
0
0
1
Number of Jeep Grand Wagoneer services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Dodge Caliber
If If you’re looking for a compact car that offers a bit more space with acceptable fuel economy, the 2012 Dodge Caliber is a worthy target. The hatchback design is versatile, while the cooling storage compartment, removable flashlight (rechargeable) and...
What To Do If Your Car Is Skidding
Driving Driving on wet or icy roads can easily lead to dangerous situations when you're behind the wheel. One of the most common of these situations is skidding. While this can be scary to deal with on its own, understanding...
How to Refinance a Car Loan
Very few people have the money on hand to purchase their vehicle outright. Vehicle financing is in place to give purchasers the option of borrowing money from a lending institution. Whether you have good credit, bad credit, or no credit,...

Rattle under car

The vehicle should be inspected for the loose or broken component which many be minor in many cases. The exhaust system uses rubber hangers that crack and break allowing extra movement. The components of the exhaust system are prone to...

Clutch doesnt work

You most likely broke the clutch or transmission input shaft gear. This most likely happened when you started the engine without pushing in the clutch. The normal way was to push in the clutch to start the truck. Now you...

Creaking Sound coming from passenger front side when driving

Hello. A creaking sound can be caused by a wide variety of issues. A few common causes are worn suspension components or bushings. The first thing I would do is try to identify where the noise is coming from, and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com