Jeep FC150 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Jeep FC150 Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1962 Jeep FC150L4-2.2LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1961 Jeep FC150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1966 Jeep FC150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1964 Jeep FC150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1965 Jeep FC150L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1961 Jeep FC150L4-2.2LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1966 Jeep FC150L4-2.2LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1965 Jeep FC150L4-2.2LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Jeep FC150 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(298)

Rating Summary
290
5
1
0
2
290
5
1
0
2

Wesley

9 years of experience
111 reviews
Wesley
9 years of experience
Jeep Wrangler L6-4.0L - Car Battery Replacement - Phoenix, Arizona
Absolutely professional and friendly. Can’t recommend Wesley enough.

Jesse

16 years of experience
61 reviews
Jesse
16 years of experience
Jeep Cherokee V6-3.2L - Battery - Daytona Beach, Florida
Right on time, personable, fast in service. I would use your service and specifically Jesse in future

John

36 years of experience
434 reviews
John
36 years of experience
Jeep Patriot L4-2.4L - Car Battery Replacement - San Francisco, California
Got to my house very early, very friendly, and worked quick and efficient.

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Jeep Patriot L4-2.4L - Battery - Brentwood, Tennessee
Joe is the man! Would use service again just for him

Excellent Rating

(298)

Rating Summary
290
5
1
0
2
290
5
1
0
2
Number of Jeep Car Battery Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Turn Signal Bulb Last?
For For most drivers, staying safe while on the road is a top concern and something that they take very seriously. With all of the different features on a car that are designed to increase the safety of the driver,...
P2036 OBD-II Trouble Code: Exhaust Gas Temp Sensor Circuit High (Bank 2 Sensor 2)
P2036 P2036 Code Definition Exhaust Gas Temp Sensor Circuit High (Bank 2 Sensor 2) What the P2036 code means The P2036 trouble code indicates that the Engine Control Module (ECM) has detected a malfunction in the exhaust gas temperature (EGT)...
Windshield Laws in New Hampshire
Driving Driving in New Hampshire requires motorists to understand and follow the traffic rules that are applicable throughout the state. In addition to the rules of the road, drivers are also required to make sure that their windshields are in...

In a keyless entry car, can you also have an alarm say auto watch alarm system installed?

Hello. From what you describe it would appear that the aftermarket alarm system may be having an issue. If the alarm has done this since it was installed then it may be possible that it is wired improperly, or that...

Car cranks won't turn over, fuel pump not turning on but was remove and tested it has power and is working. Fuses good relay good.

There can be a sensor or electronic control unit (ecu) issue. If for example, the crankshaft sensor is faulty, the ecu may not see engine revolution when you're cranking. If either due to a faulty crank sensor, or ecu, the...

How do you turn on 'horn beep' feature when using the remote in 2017 corolla

Try to hold down the lock button for 5 seconds and while holding it down also press the panic button once. Try this and see if it does the trick? If not then look in the owners manual for remote...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com