Jeep F-134 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(448)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(448)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Jeep F-134 Brake Pad Replacement is $178 with $83 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1963 Jeep F-134L4-2.2LService typeBrake Pads - Front ReplacementEstimate$280.31Shop/Dealer Price$331.64 - $463.13
1964 Jeep F-134L4-2.2LService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1966 Jeep F-134L4-2.2LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1963 Jeep F-134L4-2.2LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.64 - $443.12
1965 Jeep F-134L4-2.2LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.67 - $443.19
1966 Jeep F-134L4-2.2LService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1965 Jeep F-134L4-2.2LService typeBrake Pads - Front ReplacementEstimate$265.31Shop/Dealer Price$316.52 - $447.92
1964 Jeep F-134L4-2.2LService typeBrake Pads - Rear ReplacementEstimate$265.31Shop/Dealer Price$316.89 - $448.58
Show example Jeep F-134 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(448)

Rating Summary
434
11
1
0
2
434
11
1
0
2

Claud

8 years of experience
475 reviews
Claud
8 years of experience
Jeep Grand Cherokee L6-4.0L - Brake Pads Replacement (Front) - Royal Oak, Michigan
The only mechanic that I trust!!

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Jeep Compass L4-2.0L - Brake Pads Replacement (Front) - Ponte Vedra Beach, Florida
Brian was very thorough and timely. He took the time to explain the things that needed to done on our car, and what was urgent.

Chad

16 years of experience
76 reviews
Chad
16 years of experience
Jeep Grand Cherokee V6-3.6L - Brake Pads Replacement (Front, Rear) - Richmond, Virginia
Chad went above and beyond to help me out this past weekend. After my original mechanic couldn't solve my needs, Chad offered to come work on my car after hours and on his day off. His work was efficient and professional. He took the time to explain things along the way and ensured I was aware of what he was doing along the way. He didn't have to help me out in a pinch but he did. Throughout the two days, you can see he takes great pride in his work and that the integrity of his work and his name against it is of the utmost importance. You can't go wrong in booking Chad and the fact that he went above and beyond was truly appreciated!

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Jeep Wrangler V6-3.8L - Brake Pads Replacement (Rear) - Renton, Washington
Great!

Excellent Rating

(448)

Rating Summary
434
11
1
0
2
434
11
1
0
2
Number of Jeep Brake Pad Replacement services completed
4928+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Why Are 5W-30 and 5W-20 Oils So Common?
Changing oil is one of the most important car care tasks. Most cars use 5W-20 or 5W-30 oil because those oils work best in hot or cold temperatures.
How Long Does an Air Suspension Dryer Assembly Last?
Most Most modern cars use a system of gas-filled shocks and struts in the suspension system. Increasingly, though, vehicles are becoming equipped with air suspension systems. They are quite common in luxury cars, and also featured as upgrades on other...
Rules of the Road For Connecticut Drivers
Most Most driving rules are based on common sense, and you also have a strong grasp on the laws that you must follow when driving in your home state. However, if you are traveling or moving to Connecticut, you need...

Turn signal doesn't turn off after making turn

Hello. The problem is the cancellation spring located in the turn signal arm. This spring makes contact with the high spots in the column when the steering wheel turns. These high spots hit the spring and cause it to return...

Why is my 2010 kia forte sound like it is grinding when I'm driving but when I push the gas harder it stops?

Hi there. If your vehicle is emitting a noise when driving but when you apply more acceleration the noise goes away, then there could be an issue with the engine's lubrication system. Check the engine oil level and make sure...

The car will not crank but makes a light clicking noise.

When you hear a clicking under the hood instead of the starter, I immediately think of the battery voltage. It could be that the charging system is not working and you drove the car until the battery voltage dropped off....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com