Jeep DJ3 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Jeep DJ3 Wheel Bearings Replacement is $257 with $153 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1962 Jeep DJ3L4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$431.71Shop/Dealer Price$519.02 - $756.18
1966 Jeep DJ3L4-3.2L DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$409.71Shop/Dealer Price$497.04 - $734.22
1963 Jeep DJ3L4-3.2L DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$409.71Shop/Dealer Price$497.03 - $734.21
1963 Jeep DJ3L4-3.2L DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$409.71Shop/Dealer Price$497.01 - $734.17
1964 Jeep DJ3L4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$409.71Shop/Dealer Price$497.05 - $734.24
1962 Jeep DJ3L4-2.2LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$409.71Shop/Dealer Price$497.03 - $734.21
1964 Jeep DJ3L4-3.2L DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$415.21Shop/Dealer Price$502.38 - $739.45
1961 Jeep DJ3L4-2.2LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$415.21Shop/Dealer Price$502.79 - $740.17
Show example Jeep DJ3 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(41)

Rating Summary
37
2
0
0
2
37
2
0
0
2

John

19 years of experience
138 reviews
John
19 years of experience
Jeep Patriot L4-2.0L - Wheel Bearings Replacement (Driver Side Rear, Passenger Side Rear) - Cedar Park, Texas
John was very cordial and professional, he got on time and did a great job. It says how knowledgeable he is

Robert

27 years of experience
43 reviews
Robert
27 years of experience
Jeep Compass L4-2.0L - Wheel Bearings Replacement (Driver Side Front) - Atlanta, Georgia
Robert was great! He shared with me additional things that need to be done on my car.

Joel

30 years of experience
76 reviews
Joel
30 years of experience
Jeep Grand Cherokee V8-5.7L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Phoenix, Arizona
Nice gentleman, professional demeanor, had the right tools for the job.

Taylor

8 years of experience
47 reviews
Taylor
8 years of experience
Jeep Grand Cherokee V8-4.7L - Wheel Bearings Replacement (Driver Side Front, Passenger Side Front) - Dallas, Georgia
did a fine job on my wheel bearings. he is a good mechanic

Excellent Rating

(41)

Rating Summary
37
2
0
0
2
37
2
0
0
2
Number of Jeep Wheel Bearings Replacement services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Toyota FJ Cruiser
If If you’re looking for a hint of nostaligia in an SUV that can actually handle off-roading like a pro, the 2012 Toyota FJ Cruiser is the perfect choice for you. Designed specifically for tackling those off-road jaunts, what this...
How Long Does a Cruise Control Brake Release Switch Last?
The The cruise control brake release switch allows you to turn off the cruise control. On vehicles with a manual transmission, there is a clutch release switch that cancels the cruise control when the clutch pedal is pressed in. In...
How to Replace a Radiator Hose
The The radiator hose is an important part of your vehicle’s cooling system. The hose carries the coolant to the radiator, where the fluid is cooled, then back to the engine to keep the vehicle from overheating. This allows your...

What Types of Metals Are Used to Make Exhaust Systems?

Chances are good that your exhaust system is made from 400-series steel. Cast iron is used for the exhaust manifold (stock). Aluminized steel is often used in aftermarket exhaust systems. In addition, a wide range of other metals can be...

What is making my car shut off and smoke coming from my oil cap?

The inner workings of the engine get very hot during operation especially is the vehicle beings to overheat. The smoke you are seeing come the oil cap may be fumes from the hot oil circulating through the engine. If the...

2014 Ford Fusion battery dies intermittently after sitting for a day or more

You could have an intermittent ground connection, or other poor connection in the starting circuit or other main circuit. Such a problem would have nothing to do with the charging circuit or the battery. If the problem is not in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com