Jaguar XFR Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jaguar XFR Control Arm Assembly Replacement is $366 with $198 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$1125.34Shop/Dealer Price$1326.35 - $1874.71
2011 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$988.80Shop/Dealer Price$1175.37 - $1715.46
2012 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$673.70Shop/Dealer Price$781.61 - $1085.48
2013 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1075.86Shop/Dealer Price$1284.30 - $1889.78
2015 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$673.70Shop/Dealer Price$788.60 - $1097.71
2015 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1098.83Shop/Dealer Price$1288.49 - $1827.10
2010 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$982.04Shop/Dealer Price$1167.11 - $1702.28
2014 Jaguar XFRV8-5.0L TurboService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$988.80Shop/Dealer Price$1175.48 - $1715.66
Show example Jaguar XFR Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Jaguar XFR V8-5.0L Turbo - Oil/Fluid Leak - Pomona Park, Florida
Very professional, goes all the way to assure you are satisfied.

Benji

23 years of experience
309 reviews
Benji
23 years of experience
Jaguar XFR V8-5.0L Turbo - Pre-purchase Car Inspection - Phoenix, Arizona
A+++

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Jaguar XFR V8-5.0L Turbo - Oil Change - Winchester, California
Chris was not only prompt, he was early! He was courteous, knowledgeable, and went right to work, when done, he cleaned everything up, like he had never been there, GOOD JOB!!

Christian

13 years of experience
40 reviews
Christian
13 years of experience
Jaguar XFR V8-5.0L Turbo - Car is shaking or vibrating - Santa Monica, California
Christian showed up early and was able to quickly diagnose the problem. After giving me a solid course of action to follow up he also did a standard inspection. Christian was personable, professional and great to work with.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Jaguar XFR services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
500+
experts on our platform

Recent articles & questions

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Hawaii
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Hawaii through state-determined criteria.
A Buyer’s Guide to the 2012 Chevrolet Traverse
You You might not always need all of the cargo and passenger space available to you when you buy a 2012 Chevrolet Traverse, but it’s nice to know it’s there. This seven-passenger crossover utility vehicle (CUV) has tons of space...
How to Buy a Good Quality Drivetrain
Drivetrains include the transmission, driveshaft, and axles. Buy an original equipment manufacturer (OEM) drivetrain with a drivetrain warranty.

Air conditioning on high caused radio turn off, gas gauge to empty,warning lights on

The most likely cause of this is a battery with a failed cell, alternator, battery cable or the AC compressor itself. If the charging system has a fault, it will not be able to support all of the car's systems,...

What other issues could I check, if I changed my coolant temperature sensor and my vehicle is still jumping or missing?

You need to fix that air leak. The best thing to do is buy a new intake boot. If you're short on funds, you can use duct tape or some other strong tape to cover the hole in lieu of...

I have a 2007 Ford F1 50 I just replaced the automatic [transmission](/topics-transmission-ford/) and was about to go for a test drive when I start the vehicle and shift into any of the gears the transmission does not engage is it possible that I have missed something

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com