Jaguar XF Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(221)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(221)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Jaguar XF Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Jaguar XFV6-3.0L TurboService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
2018 Jaguar XFL4-2.0L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2014 Jaguar XFV8-5.0L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2020 Jaguar XFL4-2.0L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2011 Jaguar XFV8-5.0LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
2014 Jaguar XFL4-2.0L TurboService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
2009 Jaguar XFV8-4.2L TurboService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$124.69 - $143.22
2019 Jaguar XFV6-3.0L TurboService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jaguar XF Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jaguar mechanics

Real customer reviews from Jaguar owners like you.

Excellent Rating

(221)

Rating Summary
202
8
2
0
9
202
8
2
0
9

Keith

18 years of experience
374 reviews
Keith
18 years of experience
Jaguar XF L4-2.0L Turbo - Oil Change - Kissimmee, Florida
very knowledgeable and experience , I would like to keep him as my mechany

Jeremy

20 years of experience
630 reviews
Jeremy
20 years of experience
Jaguar XF V8-4.2L Turbo - Wheel Stud Replacement (Driver Side Front) - West Palm Beach, Florida
Very professional and had to improvise to remove the damaged lug nut. Very much appreciate his work.

Paul

25 years of experience
266 reviews
Paul
25 years of experience
Jaguar XF V8-4.2L - Clean Throttle Body - Las Vegas, Nevada
Great guy very knowledgeable, would recommend

James

22 years of experience
5 reviews
James
22 years of experience
Jaguar XF V8-5.0L - Battery - Folsom, California
did a excellent job, on time, straight forward, was a great first experience with your company.

Excellent Rating

(221)

Rating Summary
202
8
2
0
9
202
8
2
0
9
Number of Jaguar XF services completed
2431+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jaguar MECHANICS
400+
experts on our platform

Recent articles & questions

4 Essential Things to Know About Your Car’s Headrests
Most Most people take the headrests in their vehicles for granted unless there is an issue with them. They are actually far more important than most realize, and are actually a part of the vehicle’s safety system. What Do the...
5 Essential Things to Know About Your Car’s Cruise Control
The The cruise control in your vehicle is also known as speed control or autocruise. It is a system that controls the speed of your vehicle for you, while you maintain steering. Basically, it takes over the throttle to keep...
P0197 OBD-II Trouble Code: Engine Oil Temperature (EOT) Sensor Low
P0197 P0197 code definition Engine Oil Temperature (EOT) Sensor Low What the P0197 code means This code specifically means that the resistance value the powertrain control module (PCM) sees is low in comparison to the predefined specifications. This can possibly...

Heater not working

If steam is coming out of your vents, the heater core is leaking. Replacement of the heater core on your particular vehicle requires dashboard removal and should only be attempted by qualified technicians like ones from YourMechanic. They will be...

Is all transmission oil pink?

Hi There, If the color of the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) is brown or similar to the color of engine oil, it is quite likely that it is burnt and due for a change. A transmission fluid flush is a much...

crankshaft pulley bolt is bent and car will no longer start. prior to noticing car would make knocking sound

My best guess is that the crankshaft bolt worked loose and as it became more and more loose the front pulley and maybe the timing belt sprocket started knocking around. Once the bolt became loose enough that the front sprocket...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com